AutoDome 700 Series IP PTZ Camera VG5 700 Series en User Manual
AutoDome 700 Series IP PTZ Camera Table of Contents | en 3 Table of Contents 1 Getting Started 6 1.1 Powering On 6 1.2 Establishing AutoDome Control 6 2 Using the AutoDome 700 Series 7 2.1 Overview of Features 7 2.2 System Requirements 7 2.3 Connecting the AutoDome 700 Series to the PC 8 2.4 Configuring the AutoDome 700 Series Camera 2.4.1 Changing the Network Settings 10 2.5 Configuring Intelligent Tracking 11 2.5.1 Intelligent Tracking Operation 11 2.5.
en | Table of Contents AutoDome 700 Series IP PTZ Camera 4.15 Livepage Functions 31 4.16 Logging 32 4.17 Advanced Mode: Camera 32 4.18 Installer Menu 32 4.19 Encoder Profile 33 4.20 Encoder Streams 35 4.21 Privacy Masks 36 4.22 Camera Settings 37 4.23 Lens Settings 39 4.24 PTZ Settings 40 4.25 Diagnostics 41 4.26 Preposition and Tours 41 4.27 Sectors 42 4.28 Miscellaneous 43 4.29 Logs 43 4.30 Audio 43 4.31 Pixel Counter 43 4.
AutoDome 700 Series IP PTZ Camera 5 Table of Contents | en Troubleshooting Guide 5 66 5.1 VG5 AutoDome Operation and Control 66 5.2 VG5 700 Series AutoDome Video and Control 66 5.3 VG5 Series AutoDome Audio 68 6 User Command Table 71 Index 72 Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.
1 en | Getting Started AutoDome 700 Series IP PTZ Camera Getting Started Install and wire the AutoDome according to the VG5 AutoDome Installation Manual. A typical system includes an ethernet connection, a video management system, a monitor, and appropriate wiring connections. Please refer to the individual product manuals for complete installation and setup instructions for each of the system components. 1.
AutoDome 700 Series IP PTZ Camera 2 Using the AutoDome 700 Series | en 7 Using the AutoDome 700 Series The AutoDome 700 Series transmits PTZ control commands and images over a TCP/IP network. It also allows users to configure the camera display settings, camera operating settings, and to configure the network parameters. The AutoDome 700 Series incorporates a network video server in the IP module.
en | Using the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera NOTICE! The Web browser must be configured to enable Cookies to be set from the IP address of the unit. In Windows Vista, deactivate protected mode on the Security tab under Internet Options. You can find notes on using Microsoft Internet Explorer in the online Help in Internet Explorer.
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 9 Figure 2.1 AutoDome 700 Series System Configuration 1 2 3 4 AutoDome 700 Series IP Connection Network Switch Computer NOTICE! You can also use the Bosch Video Client utility to configure the network settings for an AutoDome 700 Series camera. Go to www.boschsecurity.com to download the Configuration Manager software and Operating Manual. 2.
en | Using the AutoDome 700 Series 2.4.1 AutoDome 700 Series IP PTZ Camera Changing the Network Settings The AutoDome 700 Series has a default IP address of 192.168.0.1. To change the IP address or any network settings, you can use the Configuration Manager software or the AutoDome 700 Series server. NOTICE! Contact your local network administrator for a valid IP address, Subnet Mask, and a Gateway IP Address.
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 11 NOTICE! Click the Help on this page? link if you need more information. 8. Click the Set button to save the settings. 9. Launch another instance of Microsoft Internet Explorer. 10. Type the original IP address followed by /reset (for example, http://192.168.0.1/reset) in the address bar and click Go to restart the AutoDome 700 Series. Once you restart the AutoDome 700 Series, use the new IP Address to access the Livepage. 11.
en | Using the AutoDome 700 Series 2.5.2 AutoDome 700 Series IP PTZ Camera Guidelines for Implementing Intelligent Tracking Factors such as the viewing angle and unwanted motion (from trees, for example) may interfere with Intelligent Tracking operation. Use the following recommendations to ensure smooth Intelligent Tracking operation: – Mount/Mounting Surface Stability – Mount the camera in the most stable position.
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 13 Watermarking flag set on media item Motion flag set on media item Discovery of storage not completed. If the information about recorded video is not cached, a discovery procedure is started in order find all recorded video. During this time, the “discovery” symbol is shown. While discovery is executed, gaps might be shown in places which the discovery has not yet reached.
en | Using the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera Reference # Description Reference # Description 1 Tilts the camera up 8 Focus far2 2 Tilts the camera down 9 Focus near2 3 Pans the camera to the left 10 Iris close2 4 Pans the camera to the right 11 Iris open2 5 Pans and tilts the camera in all directions 12 6 Zoom out1 Sets the pre-set shot for the corresponding button 1, 2, 3, 4, 5 or 6 13 Moves the camera to pre-set shot numbers 1, 2, 3, 4, 5, and 6 7 Zo
AutoDome 700 Series IP PTZ Camera 2. Using the AutoDome 700 Series | en 15 If you want to view a detailed log, click the icon in the top right-hand corner of the relevant field. A new window will open. 2.6.1 Entering a Keyboard Control Command The Aux Control tab is used to enter keyboard control commands. These commands are composed of a command number plus the appropriate function key (Show Shot, Set Shot Aux On or Aux Off).
en | Using the AutoDome 700 Series 2. AutoDome 700 Series IP PTZ Camera Click the Show Shot button. NOTICE! For more information about the AutoDome 700 Series settings and controls, click the Help on this page? link to open the AutoDome 700 Series online help. 2.6.2 Using Intelligent Tracking Intelligent Tracking continuously follows an individual or an object.
AutoDome 700 Series IP PTZ Camera Using the AutoDome 700 Series | en 17 – Actively tracked object in motion are identified in the video by a blue outline. – When an object in motion is lost, a blue diamond appears designating the area where the target was lost. 2.6.3 Using Special Functions The AutoDome offers several special command buttons on the Livepage. Scan 360 Click this button to start a continuous 360° pan. To stop the continuos pan, click a directional control in the View Control tab.
2.9 en | Using the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera Processor Load If the AutoDome 700 Series is accessed via the Web browser, you will see the processor load indicator in the top left of the window next to the manufacturer's logo. You can obtain additional information to help when you troubleshoot or fine-tune the unit. The values indicate the proportions of the individual functions on the encoder load, shown as percentages. Move the cursor over the graphic indicator.
AutoDome 700 Series IP PTZ Camera 2.10 Using the AutoDome 700 Series | en 19 Recordings page Click Recordings to access the Recordings page from the Livepage or Settings page (the Recordings link is only visible if a storage medium has been selected). Selecting Recordings All saved sequences are displayed in a list. A track number is assigned to each sequence. Start time and stop time, recording duration, number of alarms, and recording type are displayed. To play back recorded video sequences: 1.
en | Using the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera Set bookmark Jump to the following bookmark Bookmarks are only valid while in the Recordings page; they are not saved with the sequences. All bookmarks are deleted when leaving the page. F.01U.273.798 | 3.0 | 2012.08 User Manual Bosch Security Systems, Inc.
AutoDome 700 Series IP PTZ Camera 3 VG5 Audio Connections | en 21 VG5 Audio Connections The audio version of the AutoDome 700 Series has one audio input for line signals. The audio signals are transmitted one-way and in-sync with the video signals. As a result, a door intercom system can be connected at the camera location. NOTICE! The line ports of the intercom should be used for transmitting audio signals on the intercom systems. 3.
en | VG5 Audio Connections 3.1.5 AutoDome 700 Series IP PTZ Camera Configuring Gain (optional) Input gain control is supported over a range of -34dB to +12dB. Click the Audio link in the Settings page. The page displays the current video image in the small window next to the slide controls to help verify the audio source and improve the Peak levels. Set the gain of the audio signals to suit your specific requirements. Changes are effective immediately.
AutoDome 700 Series IP PTZ Camera 4 Configuring the AutoDome 700 Series | en 23 Configuring the AutoDome 700 Series The SETTINGS page provides access to the configuration menu, which contains all the unit's parameters arranged in groups. You can view the current settings by opening one of the configuration screens. You can change the settings by entering new values or by selecting a predefined value from a list field.
en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera CAUTION! Do not use any special characters, for example &, in the name. Special characters are not supported by the system's internal recording management and may therefore result in the Player or Archive Player being unable to play back the recording. Password An AutoDome 700 Series is generally protected by a password to prevent unauthorized access to the unit. You can use different authorization levels to limit access.
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 25 Select Time server for a time server that works with the protocol RFC 868. 4.3 Basic Mode: Network The settings on this page are used to integrate the AutoDome 700 Series into an existing network. Some changes only take effect after the unit is rebooted. In this case, the Set button changes to Set and Reboot. 1. 2. Make the desired changes. Click the Set and Reboot button.
en | Configuring the AutoDome 700 Series – AutoDome 700 Series IP PTZ Camera Low bandwidth Target bit rate: 700 kbps Maximum bit rate: 1500 kbps Encoding interval: 30.00 ips – DSL Target bit rate: 400 kbps Maximum bit rate: 500 kbps Encoding interval: 30.00 ips – ISDN (2B) Target bit rate: 80 kbps Maximum bit rate: 100 kbps Encoding interval: 30.00 ips – ISDN (1B) Target bit rate: 40 kbps Maximum bit rate: 50 kbps Encoding interval: 30.
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 27 Storage medium 4.7 1. Select the required storage medium from the list. 2. Click the Start button to start the recording immediately. Basic Mode: System Overview The data on this page are for information purposes only and cannot be changed. Keep a record of this information in case technical assistance is required.
en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera NOTICE! Proper password protection is only guaranteed when all higher authorization levels are also protected with a password. If a live password is assigned, for example, a service and a user password must also be set. When assigning passwords, you should therefore always start from the highest authorization level, service, and use different passwords.
AutoDome 700 Series IP PTZ Camera 1. Configuring the AutoDome 700 Series | en 29 First check whether the correct time zone is selected. If it is not correct, select the appropriate time zone for the system, and click the Set button. 2. Click the Details button. A new window will open and you will see the empty table. 3. Select the region or the city that is closest to the system's location from the list field below the table. 4.
en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera Display milliseconds If necessary, you can also display milliseconds. This information can be useful for recorded video images; however, it does increase the processor's computing time. Select Off if you do not need to display milliseconds. Alarm mode stamping Select On to display a text message overlay in the image in the event of an alarm.
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 31 Website language Select the language for the user interface here. Company logo Enter the path to a suitable graphic if you want to replace the manufacturer's logo. The image file can be stored on a local computer, in the local network or at an Internet address. Device logo Enter the path to a suitable graphic if you want to replace the product name.
en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera Show event log The event messages are displayed along with the date and time in a field next to the video image. Show system log The system messages are displayed along with the date and time in a field next to the video image and provide information about establishing and ending connections, for example. Allow snapshots Here you can specify whether the icon for saving individual images should be displayed below the live image.
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 33 CAUTION! The AutoDome disables the Privacy Mask function if the orientation is set to Inverted. SC Settings Click the Default button to restore all camera settings to their original defaults. SC Data Click the default button to clear all preposition, privacy mask, and other user settings. Reboot Device Performs a reboot of the AutoDome. There is a ten (10) second pause before the dome starts its homing phase.
en | Configuring the AutoDome 700 Series – AutoDome 700 Series IP PTZ Camera ISDN (1B) Target bit rate: 40 kbps Maximum bit rate: 50 kbps Encoding interval: 30.00 ips – Modem Target bit rate: 20 kbps Maximum bit rate: 22 kbps Encoding interval: 30.00 ips – GSM Target bit rate: 7 kbps Maximum bit rate: 8 kbps Encoding interval: 30.00 ips You can change individual parameter values of a profile and you can also change the name. You can switch between profiles by clicking the appropriate tabs.
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 35 Encoding Interval The figure selected here determines the interval at which images are encoded and transmitted. The image rate in ips (images per second) is displayed next to the text field. Use the slide bar to select a frame rate from 30.00 ips to 1 ips. Expert Settings Use the expert settings to adapt the I-frame quality and the P-frame quality to specific requirements, if necessary. The setting is based on the H.
en | Configuring the AutoDome 700 Series – AutoDome 700 Series IP PTZ Camera H.264 MP SD Select this setting when using software decoders, PTZ and for rapid movements in the images. CABAC: on CAVLC: off GOP structure: IP I-frame distance: 30 Deblocking filter: on To select the stream options: 1. Select the required encoder properties and one of the encoder profiles for each data stream. 2. 3. Click the Preview button. The preview screens for both data streams are shown.
AutoDome 700 Series IP PTZ Camera 2. Configuring the AutoDome 700 Series | en a. Click the View Control link. b. Use the PTZ controls to view the scene. 37 Select the privacy mask number to apply to the scene. The preview window displays a gray rectangle in the scene. 3. Click the Enable check box to activate the privacy mask. The privacy mask in the preview window changes to orange to indicate that the mask will appear in the video streams on the Livepage. 4.
en | Configuring the AutoDome 700 Series – AutoDome 700 Series IP PTZ Camera AGC (default): electronically brightens dark scenes, which may cause graininess in low light scenes. – Fixed: no enhancement. This setting disables the Max. Gain Level option. If you select this option, the AutoDome 700 Series makes the following changes automatically: – Night Mode: switches to Color – Auto Iris: switches to Constant Maximum Gain Level Controls the maximum value the gain can have during AGC operation.
AutoDome 700 Series IP PTZ Camera – Configuring the AutoDome 700 Series | en 39 Auto (default): The camera switches out of Night Mode after the ambient light level reaches a pre-defined threshold. Night Mode Threshold Adjusts the level of light at which the camera automatically switches out of night mode (B/W) operation. Select a value between 10 and 55 (in increments of 5), where 10 is earlier and 55 is later. Noise Reduction Turns on the 2D and 3D noise reduction feature.
en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera Maximum Zoom Speed Controls the zoom speed. The default setting is Medium. Zoom Polarity Capability to reverse the operation of the zoom button on the controller. – Normal (default): zoom controls operate normally. – Reverse: zoom controls are reversed. Digital Zoom Digital zoom is a method of decreasing (narrowing) the apparent angle of view of a digital video image.
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 41 Tilt Limits Click the Reset button to clear the upper tilt limit. Tour A / Tour B Starts and stops the recording of a recorded (guard) tour. The AutoDome can make up to two (2) recorded tours. A Recorded Tour saves all manual camera movements made during the recording, including its rate of pan, tilt and zoom speeds and other lens setting changes.
en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera the highest scene number in the tour. The tour displays each scene for a specified dwell time before advancing to the next scene. By default, all scenes are part of the preposition tour unless removed. To define and edit an individual scene: 1. Navigate to the scene that you want to define as a preposition. a. Click the View Control link. b. Use the PTZ controls to move the camera into position. 2.
AutoDome 700 Series IP PTZ Camera 4.28 Configuring the AutoDome 700 Series | en 43 Miscellaneous Address Allows the appropriate dome to be operated via the numerical address in the control system. Type a number between 0000 and 9999, inclusive, to identify the camera. 4.29 Logs To save the log file information: 4.30 1. Click Download to obtain the log information. 2. Click Save. 3. Navigate to the directory in which you want to store the log information. 4.
en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera video servers. For further information please contact your local customer service at Bosch Security Systems, Inc. Device manager If you activate the VRM option in this screen, the VRM Video Recording Manager will manage all recording and you will not be able to configure any further settings here. CAUTION! Activating or deactivating VRM causes the current settings to be lost; they can only be restored through reconfiguration.
AutoDome 700 Series IP PTZ Camera 5. Configuring the AutoDome 700 Series | en 45 Check the boxes for the Overwrite older recordings option to specify which older recordings can be overwritten once the available memory capacity has been used. Recording 1 corresponds to Stream 1, Recording 2 corresponds to Stream 2. CAUTION! If older recordings are not allowed to be overwritten when the available memory capacity has been used, the recording in question will be stopped.
en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera CAUTION! You can specify limitations for overwriting older recordings in Continuous mode by configuring the retention time (see Section 4.35 Retention Time, page 46). Standard profile From this field, you can select the encoder profile to be used for recording (see Section 4.19 Encoder Profile, page 33).
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 47 Retention time Enter the required retention time in hours or days for each recording. Recording 1 corresponds to Stream 1, Recording 2 corresponds to Stream 2. 4.36 Recording Schedule The recording scheduler allows you to link the created recording profiles with the days and times at which the camera's images are to be recorded in the event of an alarm.
en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera 1. Click the Start button to activate the recording scheduler. 2. Click the Stop button to deactivate the recording scheduler. Running recordings are interrupted and the configuration can be changed. Recording status The graphic indicates the recording activity of the AutoDome 700 Series. You will see an animated graphic while recording is taking place. 4.
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 49 NOTICE! If you enter the destination IP address 0.0.0.0 for destination 10, this address will no longer be used for the tenth attempt at automatic connection in the event of an alarm. The parameter is then used only to save the general password. Video transmission If the unit is operated behind a firewall, TCP (HTTP port) should be selected as the transfer protocol. For use in a local network, select UDP.
en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera Auto-connect Select the On option to automatically re-establish a connection to one of the previously specified IP addresses after each reboot, after a connection breakdown or after a network failure. NOTICE! In the default setting, Stream 2 is transmitted for automatic connections. Bear this fact in mind when assigning the profile (see Section 4.19 Encoder Profile, page 33). 4.
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 51 Analysis type Select the required analysis algorithm. By default, only MOTION+ is available – this offers a motion detector and essential recognition of tampering. NOTICE! Additional analysis algorithms with comprehensive functions such as IVMD and IVA are available from Bosch Security Systems, inc. If you select one of these algorithms, you can set the corresponding parameters here directly.
en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera Select Area (MOTION+ only) The areas of the image to be monitored by the motion detector can be selected. The video image is subdivided into 858 square fields. Each of these fields can be activated or deactivated individually. If you wish to exclude particular regions of the camera's field of view from monitoring due to continuous movement (by a tree in the wind, etc.), the relevant fields can be deactivated. 1.
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 53 Global change Activate this function if the global change, as set with the Global change slide control, should trigger an alarm. Scene too bright Activate this function if tampering associated with exposure to extreme light (for instance, shining a flashlight directly on the lens) should trigger an alarm. The average brightness of the scene provides a basis for recognition.
en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera 4. If necessary, click Select All to select the entire video frame for monitoring. 5. Right-click any fields you wish to deactivate. 6. Click OK to save the configuration. 7. Click the close button X in the window title bar to close the window without saving the changes. 4.41 Audio Alarm The AutoDome 700 Series can create alarms on the basis of audio signals.
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 55 Mail server IP address Enter the IP address of a mail server that operates on the SMTP standard (Simple Mail Transfer Protocol). Outgoing e-mails are sent to the mail server via the address you entered. Otherwise leave the box blank (0.0.0.0). SMTP user name Enter a registered user name for the chosen mailserver here. SMTP password Enter the required password for the registered user name here.
en | Configuring the AutoDome 700 Series 2. AutoDome 700 Series IP PTZ Camera Enter new scripts in the Alarm Task Editor field or change existing scripts in line with your requirements. 3. When you are finished, click the Set button to transmit the scripts to the unit. If the transfer was successful, the message Script successfully parsed is displayed over the text field. If it was not successful, an error message will be displayed with further information. 4.
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 57 Idle State Specify either Open or Closed idle state. Operations Mode Select one of the following modes for operation: Bistable, 0.5 s, 1 s, 5 s, 10 s, or 60 s.
en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera Gateway address If you want the unit to establish a connection to a remote location in a different subnet, enter the IP address of the gateway here. Otherwise leave the box blank (0.0.0.0). 4.49.2 IPv6 Consult with the network administrator before making changes to the this section. IP Address Enter the desired IP address for the AutoDome 800 Series in this field. The IP address must be valid for the network.
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 59 NOTICE! If you want to allow only secure connections with SSL encryption, you must select the Off option for each of the parameters HTTP browser port, RCP+ port 1756 and Telnet support. This deactivates all unsecured connections. Connections will then only be possible via the HTTPS port. You can activate and configure encryption of the media data (video and metadata) on the Encryption page (see Section 4.
en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera Force registration now You can force the registration by transferring the IP address to the DynDNS server. Entries that change frequently are not provided in the Domain Name System. It is a good idea to force the registration when you are setting up the device for the first time. Only use this function when necessary and no more than once a day, to avoid the possibility of being blocked by the service provider.
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 61 RTSP port If necessary, select a different port for the exchange of the RTSP data from the list. The standard RTSP port is 554. Select Off to deactivate the RTSP function. NTCIP Specifies a set of rules and protocols for organizing, describing and exchanging transportation management information between transportation management applications and transportation equipment such that they interoperate with each other.
en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera A special IP address (class D address) must be configured for multicast operation in a multicast-enabled network. The network must support group IP addresses and the Internet Group Management Protocol (IGMP V2). The address range is from 225.0.0.0 to 239.255.255.255. The multicast address can be the same for multiple streams.
AutoDome 700 Series IP PTZ Camera – Configuring the AutoDome 700 Series | en 63 Date/time suffix The date and time are automatically added to the file name. When setting this parameter, ensure that the unit's date and time are always correctly set. Example: the file snap011005_114530.jpg was stored on October 1, 2005 at 11:45 and 30 seconds. Posting interval Enter the interval in seconds at which the images will be sent to an FTP server. Enter zero if you do not want any images to be sent.
en | Configuring the AutoDome 700 Series AutoDome 700 Series IP PTZ Camera CAUTION! Before launching the firmware upload make sure that you have selected the correct upload file. Uploading the wrong files can result in the unit no longer being addressable, in which case you must replace the unit. You should never interrupt the installation of firmware. An interruption can lead to the flashEPROM being incorrectly programmed.
AutoDome 700 Series IP PTZ Camera Configuring the AutoDome 700 Series | en 65 Configuration You can save configuration data for the AutoDome 700 Series on a computer and then load saved configuration data from a computer to the unit. Upload 1. 2. Enter the full path of the file to upload or click Browse to select the required file. Make certain that the file to be loaded comes from the same unit type as the unit you want to configure. 3. Next, click Upload to begin transferring the file to the unit.
en | Troubleshooting Guide AutoDome 700 Series IP PTZ Camera 5 Troubleshooting Guide 5.1 VG5 AutoDome Operation and Control Problem Solution No video – Check that the Green LED on the AutoDome CPU board is on. This LED indicates video from the camera. If the Green LED is off, then: – Check that the Red LED on the AutoDome CPU board is slowly blinking. This LED indicates power to the AutoDome power supply board and to the CPU Module. Red LED on AutoDome CPU M0.
AutoDome 700 Series IP PTZ Camera Problem Solution No Network – Connection Troubleshooting Guide | en 67 Check all network connections – Ensure that the maximum distance between any two Ethernet connections is 100 m (328 ft) or less. Refer to the VG5 AutoDome Installation Manual for more information. If O.K., then: – Bosch Security Systems, Inc. If you are behind a firewall, ensure that the Video Transmission mode is set to UDP. a. Access the Settings Web page for the IP-enabled device. b.
5.3 en | Troubleshooting Guide AutoDome 700 Series IP PTZ Camera VG5 Series AutoDome Audio The following diagram illustrates the path for audio transmissions between a microphone/ AutoDome and a computer that plays the audio. Audio Connections with VG5 700 Series AutoDome The VG5 700 Series AutoDome uses an Ethernet connection to connect directly to an existing network. Figure 5.
AutoDome 700 Series IP PTZ Camera Problem Solution No Audio – Troubleshooting Guide | en 69 Check the computer receiving the audio from the VG5 AutoDome or from the IP Encoder. – Check the computer’s audio settings. Ensure that the sound levels are at an audible level. – Check the computer’s audio output card and speakers. Play a secondary source of audio on the computer. If you still do not hear audio replace the speakers and try again. If O.K.
en | Troubleshooting Guide Problem AutoDome 700 Series IP PTZ Camera Solution If O.K., then: – Check all network connections. – If the video is clear and contains no distortion, then the network connections are probably not the source of audio problems. – Ensure that the maximum distance between any two Ethernet connections is 100 m (328 ft). Refer to the VG5 AutoDome Installation Manual for more information.
AutoDome 700 Series IP PTZ Camera 6 Locked Y User Command Table | en 71 User Command Table Alarm Rule Output Function Key Comm No.
AutoDome 700 Series IP PTZ Camera Index | en 72 Index Symbols D /reset 11 date 28 date format 28 daylight saving time 28 default profile 35 default recording profile 45 default VCA profile 50 deleting recordings 45 device ID 27 device name 23 DHCP server 25 Dibos 7 DirectX 8 Display stamping 12 display stamping 29 displaying on-screen menus 15 dual streaming 7, 33 DynDNS 59 A activating the recording 47 activation key 65 alarm 30 alarm e-mail 54 alarm message 30 alarm rule 56 alarm sensors 46 audio a
en | Index Intelligent Tracking 11, 16 field of view recommendations 12 mount recommendations 12 internal clock 28 IP 7 /reset 11 address 9, 10, 25 alarm 14 audio 21, 67 dual streaming 7 encoding 7 gateway address 9 Livepage 10 module 7 multicast 7 network settings page 10 port 9 record 7 snapshots 7 subnet mask 9 system requirements 7 UDP 67 IP address 57, 58 IPv4 57 IPv6 58 iSCSI settings 44 J JPEG 7 JPEG posting 62 JPEG posting interval 63 K keyboard commands 15, 71 Aux Off command 15 Aux On 15 k
AutoDome 700 Series IP PTZ Camera Index | en 74 snapshots 7, 17 SNMP 60 SNTP server 24, 29 software DirectX 8 SSL certificate 65 SSL encryption 49 standard recording profile values 45 storage media 44 storage medium 26, 27, 43 streaming 62 subnet mask 9, 25, 57 summer time 28 synchronize 24, 28 system log 14, 32 T tamper detection 52 target data rate 34 TCP 49, 58 TCP port 61 TCP/IP 7 time 24, 28, 29 time server 24, 29 IP address 24 protocol 24 time server IP address 29 time server protocol 29 time sign
en | Index F.01U.273.798 | 3.0 | 2012.08 AutoDome 700 Series IP PTZ Camera User Manual Bosch Security Systems, Inc.
AutoDome 700 Series IP PTZ Camera Bosch Security Systems, Inc. Index | en User Manual 76 F.01U.273.798 | 3.0 | 2012.
en | Index F.01U.273.798 | 3.0 | 2012.08 AutoDome 700 Series IP PTZ Camera User Manual Bosch Security Systems, Inc.
AutoDome 700 Series IP PTZ Camera Bosch Security Systems, Inc. Index | en User Manual 78 F.01U.273.798 | 3.0 | 2012.
en | Index F.01U.273.798 | 3.0 | 2012.08 AutoDome 700 Series IP PTZ Camera User Manual Bosch Security Systems, Inc.
en | Index F.01U.265.794 | 1.0 | 2011.01 VG5 AutoDome Camera User’s Manual Bosch Security Systems, Inc.
Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA 17601 U.S.A. www.boschsecurity.com © Bosch Security Systems, Inc.
