LTC3384_IN_93583.
LTC3384_IN_93583.qxd 6/26/03 2:35 PM Page 2 LTC 3384 | Installation Instruction Important Safety Instructions Warning: Do not use the lens to look at the sun. It may cause loss of sight. Attention: Do not direct the lens into the sun. It may cause a fire. Applications The Bosch 1/3” DC-iris Zoom Lenses provide high quality optics for state-of-the-art CCTV cameras. DC-iris The DC-iris direct drive feature automatically adjusts the iris opening according to lighting conditions.
LTC3384_IN_93583.qxd 6/26/03 EN | 3 Zooming and Focusing procedure: 1. Apply zoom control signals to set the zoom to “TELE” end. 2. Apply focus control signals and align focus. 3. Apply the zoom control signals to set the required angle of field. 4. If the image becomes out of focus due to zooming, adjust the back focus (see below). Back Focus Adjustment: (which can be focused on easily). 2. Set the zoom to “WIDE” and align the focus with the camera (refer to the camera instructions). 3.
LTC3384_IN_93583.qxd 6/26/03 2:35 PM Page 4 LTC 3384 | Installation Instruction Specifications Focus/Zoom Input Voltage: 6 - 12 VDC Current Consumption: 70 mA max. Motorization Speed: Approx. 3-4 s DC-iris Response speed: Temperature Range: Approx.
LTC3384_IN_93583.qxd 6/26/03 FR | 5 2:35 PM Page 5 LTC 3384 | Guide de l'utilisateur Sécurité Attention: N'utilisez pas l'objectif pour regarder le soleil. Ceci pourrait occasionner une cécité. Attention: Ne dirigez pas l'objectif vers le soleil. Ceci pourrait occasionner un incendie. Applications Les objectifs 1/3" iris-DC zoom à diaphragme automatique Bosch sont constitués d'éléments optiques de haute qualité. Ils sont destinés aux caméras de TV en circuit fermé les plus performantes.
LTC3384_IN_93583.qxd 6/26/03 2:35 PM LTC 3384 | Guide de l'utilisateur 2. Faire pivoter l'arrière de l'objectif jusqu' à la position désirée (il existe un couple de friction entre la monture CS et le corps de l'objectif, permettant une rotation sur 360°). Commandes Commandes de zoom et de mise au point: Le zoom et la mise au point sont commandés par des signaux émis à partir du contrôleur de télécommande de zoom/mise au point, par l'intermédiaire du câble de commande zoom/mise au point.
LTC3384_IN_93583.qxd 6/26/03 2:35 PM FR | 7 LTC 3384 | Guide de l'utilisateur Branchement du câble Mise au point/Zoom (Connecteur 8Broche) Commande 4 fils Mise au point Zoom Broche 2 5 2 5 Polarité + + Direction Inf. Broche 6 4 6 4 Polarité + + Direction Grand angle Près. Téléobjectif Commande 3 fils Mise au point Broche 2&6 5 2&6 5 Polarité + + Broche Polarité 2&6 + 4 2&6 4 + 2&6: reliez les broches 2 et 6 Zoom Page 7 Direction Inf. Près.
LTC3384_IN_93583.qxd 6/26/03 2:35 PM LTC 3384 | Bedienungsanleitung Sicherheit Warnung: Mit diesem Objektiv nicht in die Sonne blicken. Erblindung kann die Folge sein. Achtung: Das Objektiv nicht in die Sonne richten. Brandgefahr Anwendung Die Bosch 1/3” Zoom-Objektive mit gleichstromgesteuerter Blende optischen Qualität sind für den Einsatz an modernen Überwachungskameras bestimmt. Blendenautomatik Die Blendenautomatik paßt die Blendenöffnung den gegebenen Lichtverhältnissen an.
LTC3384_IN_93583.qxd 6/26/03 2:35 PM DE | 9 Steuerung Steuerung von Zoom und Fokus: Zoom und Fokus werden durch eigene Steuersignale vom Zoom/Fokus-Steuergerät über das entsprechende Kabel eingestellt. Die Einstellmotoren für Zoom und Fokus drehen, solange das Signal anliegt, und halten an, sobald das entsprechende Steuersignal wieder abgeschaltet wird. Einstellen des Zooms und der Fokussierung: 1. Bringen Sie das Zoom mit Hilfe des entsprechenden Steuergeräts an die Tele-Endposition.
LTC3384_IN_93583.qxd 6/26/03 2:35 PM Page 10 LTC 3384 | Bedienungsanleitung DE | 10 Gleichstromgesteuerte Blende (Anschluß 4-Stift) Pin Polarität Anschluß 3 + Antriebsspule 4 1 Dämpferspule 2 + 2 1 4 3 5 3 8 Anschluß für gleichstromgesteuerte Blendenregelung 2 6 4 1 7 Anschluß 8-Stift (Von der Löseite aus bettrachtet) Bosch Security Systems | 06 2003 | Version 93584 Technische Daten Fokus/Zoom Eingangsspannung: 6 - 12 VDC Stromverbrauch: max. 70 mA Motorgeschwindigkeit: ca. 3 - 4 Sek.
LTC3384_IN_93583.qxd 6/26/03 2:35 PM ES | 11 Page 11 LTC 3384 | Manual de instrucciones Seguridad Aviso: Use ena lente de montura CS de formato de 1/3” de pulgada solamente con cámaras con formato de 1/3” de pulgada con montura CS. Advertencia: No use la objetivo para mirar al sol. Puede causar la pérdida de la vista. Atención: No deje que el sol se refleje en la objetivo. Puede causar un incendio. Conexiones y montaje Las lentes poseen dos cables con terminales y montura de cámara CS.
LTC3384_IN_93583.qxd 6/26/03 2:35 PM Page 12 LTC 3384 | Manual de instrucciones Controles Control de zoom y enfoque: El zoom y el enfoque son controlados por señales especificas suministradas por el controlador de la lente a través del cable. Los motores del zoom y el enfoque son activados mediante una señal y se desactivan tan pronto como desaparece dicha señal. Procedimiento de enfoque: 1. Aplique la señal de control de zoom para ajustar el zoom al final de "TELE". 2.
LTC3384_IN_93583.qxd 6/26/03 E S | 13 Page 13 LTC 3384 | Manual de instrucciones Autoiris (Conector 4-Patilla) Patilla 3 4 1 2 2:35 PM Polaridad + + 2 1 4 3 Conexión Bobina de dirección Bobina de compensación 5 3 8 Conector de autoiris 2 6 4 1 7 Especificaciones Foco/Zoom Tensión de entrada: 6 - 12 Vc.c. Consumo de corriente: 70 mA máx. Velocidad de 3-4 seg. aprox. motorización: Autoiris Velocidad de respuesta: 2 seg. aprox.
LTC3384_IN_93583.qxd 6/26/03 2:35 PM Page 14 LTC 3384 | Handleiding Veiligheid Waarschuwing: De lens niet gebruiken om naar de zon te kijken. Dit kan leiden tot verlies van het gezichtsvermogen. Let op: De lens niet op de zon richten. Dit kan brand veroorzaken. Toepassingen Bosch 1/3” DC-diafragma zoomlenzen zijn optische lenzen van hoge kwaliteit welke geschikt zijn voor geavanceerde CCTV camera's. Auto-diafragma Het DC-diafragma stelt, naar gelang de lichtcondities, het diafragma automatisch in.
LTC3384_IN_93583.qxd 6/26/03 2:35 PM N L | 15 Besturingen Besturing van zoom en focus: Zoom en focus worden door specifieke signalen bestuurd welke door de zoom/focus besturing via de zoom/focus besturingskabel worden geleverd. Wanneer de signalen aanwezig zijn worden de zoom en focus motoren aangezet en wanneer de signalen verdwijnen stoppen ze. Procedure voor zoomen en scherpstellen: 1. Stel, met gebruik van zoombesturingssignalen, de zoom op 'TELE' in. 2.
LTC3384_IN_93583.qxd 6/26/03 2:35 PM Page 16 LTC 3384 | Handleiding NL | 16 DC-diafragma (Connector 4-Pen) Pen 3 4 1 2 Polariteit + + 2 1 4 3 Functie Aanstuurspoel Dempspoel 5 3 2 4 6 8 1 7 DC-diafragmaconnector 8-Pen connector (Gezien vanaf de solderzijde) Bosch Security Systems | 06 2003 | Version 93584 Technische gegevens Focus/Zoom Ingangsspanning: 6 - 12 V DC Stroomverbruik: max. 70 mA Motorsnelheid: ong. 3 tot 4 sec. DC-diafragma Reactiesnelheid: ong. 2 sec.
LTC3384_IN_93583.qxd 6/26/03 2:35 PM IT | 17 Page 17 LTC 3384 | Manuale d'istruzioni Sisurezza Pericolo: Non usare l’objettivo per guardare il sole. Può causare cecità. Attenzione: Non puntare l’objettivo sul sole. Pericolo d’incendio. Applicazioni Gli 1/3” obbiettivi DC-iris zoom Bosch con diaframma ad iride automatico off rono un'ottica di elevatissima qualità per le più moderne telecamere a circuito chiuso.
LTC3384_IN_93583.qxd 6/26/03 2:35 PM Page 18 LTC 3384 | Manuale d'istruzioni Comandi Comando Zoom e Messa a Fuoco: Il comando dello Zoom e della Messa a Fuoco viene effettuato da segnali forniti dal controllore zoom/messa fuoco mediante il cavo di comando zoom/messa a fuoco. In presenza di segnale, i motori dello zoom e della messa a fuoco vengono attivati, e disattivati quando il segnale viene tolto. Procedura di zoom e di messa a fuoco: 1.
LTC3384_IN_93583.qxd 6/26/03 IT | 19 Page 19 LTC 3384 | Manuale d'istruzioni DC-iris (Connettore 4-Pin) Pin 3 4 1 2 2:35 PM Polarità + + 2 1 4 3 Connessione Avvolg. pilotaggio Avvolg. smorzamento 5 3 2 6 4 1 8 Connettore DC-iris Specifiche Fuoco/Zoom Tensione ingresso: Consumo: Velocità motore: 6 - 12 VCC 70 mA max. Circa 3-4 sec. DC-iris Velocità risposta: Circa 2 sec.
LTC3384_IN_93583.qxd 6/26/03 Bosch Security Systems. 5600 JB Eindhoven The Netherlands Tel: +31 (40) 27 80000 Fax: +31 (40) 27 80001 www.boschsecuritysystems.com 3922 988 93584 03-27 Printed in The Netherlands Updated April 23, 2007 Data subject to change without notice.