user manual

18 en | Configuration ATM/POS Bridge
F.01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc.
5.2 Configuring Operation via a Network
After the bridge is properly configured for network access, you
can configure the COM and Terminal settings via Internet
Explorer.
To access the bridge configuration page:
1. Launch Internet Explorer and navigate to the IP address for
the bridge.
Internet Explorer displays the ATM/POS Bridge interface.
2. Use the menu in the left pane to navigate to the various
configuration pages.
3. Refer to the following sections for details about each
configuration page.
4. Click Save on each page to accept the changes.
5.2.1 System Menu
The System Menu contains settings for bridge operation.