user manual

22 en | Configuration ATM/POS Bridge
F.01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc.
– Code Page: Select the code page (character set for a
particular language) that the ATM/POS terminal uses to
encode transaction data. The selections are:
– PC437 (Latin 1)
– PC858 (Latin II + EURO)
– PC737 (Greek)
– PC775 (Baltic)
– PC855 (Cyrillic)
– PC857 (Turkish)
– Comm Channel: Select one the following channels that
connects the terminal to the bridge:
– COM 1 - RS232
– COM 2 - RS232
– COM 3 - RS232 (console)
– COM 4 - RS485
– TCP/IP Server: Select this channel if the ATM/POS
terminal connects to the bridge via a TCP/IP network.
–None
– Address: If the Comm Channel is set to TCP/IP, use the
Address field to enter one of the following addresses:
– 0.0.0.0: The default IP Address that instructs the
bridge to accept transactions from any IP Address (or
ATM/POS terminal) on the network.
– Specific IP Address: Type the IP Address of a specific
terminal to instruct the bridge to accept transactions
only from that ATM/POS terminal on this Comm
Channel.