Indoor Minidome Wall and Pipe Mounts VDA-WMT/PMT-AIDome en Installation manual
Indoor Minidome Wall and Pipe Mounts Safety | en 1 Safety 1.1 Safety precautions 3 WARNING! Medium risk: Indicates a potentially hazardous situation. If not avoided, this could result in minor or moderate bodily injury. CAUTION! Low risk: Indicates a potentially hazardous situation. If not avoided, this could result in property damage or risk of damage to the unit. 1.2 Important safety instructions Read, follow, and retain for future reference all of the following safety instructions.
Indoor Minidome Wall and Pipe Mounts 2 Unpacking | en 4 Unpacking Unpack carefully and handle the equipment with care. The packaging contains: – Mount – Teflon tape – Anti-seize grease If equipment has been damaged during shipment, repack it in the original packaging and notify the shipping agent or supplier.The shipping carton is the safest container to transport the unit. Save it for possible future use. Bosch Security Systems Installation manual AM18-Q0631 | v1.0 | 2012.
Indoor Minidome Wall and Pipe Mounts 3 Installation | en 5 Installation This installation should be made by qualified service personnel and conform to the National Electrical Code and applicable local codes. 3.1 Installing the Wall Mount Figure 3.1 Wall Mount installation 1. Determine location for wall mount. 2. Use mount as template to mark location of mount holes on walls. 3. Drill holes for anchors and install anchors into wall. 4.
Indoor Minidome Wall and Pipe Mounts 3.2 Installation | en 6 Installing the Pendant Pipe Mount Figure 3.2 Pendant Pipe Mount installation 1. 2. Determine location for pipe mount. Use the four holes in flange as template to mark drill holes in ceiling in which to position secure mount. 3. Drill the four holes into ceiling. 4. Drill fifth hole in center of four-hole pattern to mount flange. 5. Use this hole to feed wires through mount. 6. Assemble flange to pipe and pipe to cap.
Indoor Minidome Wall and Pipe Mounts 4 Dimensional outlines | en 7 Dimensional outlines The following illustrations depict the dimensional outlines for the wall and pendant pipe mounts. VDA-WMT-AIDOME Figure 4.1 Wall mount dimensions Bosch Security Systems Installation manual AM18-Q0631 | v1.0 | 2012.
Indoor Minidome Wall and Pipe Mounts Dimensional outlines | en 8 VDA-PMT-AIDOME Figure 4.2 Pendant mount dimensions Bosch Security Systems Installation manual AM18-Q0631 | v1.0 | 2012.
Bosch Security Systems www.boschsecurity.