user manual

2
Bosch Security Systems | 04-2003 | 3922 988 43318 en
Digital Congress Network | Installation and Operating Manual | Chapter 8 - Information Displays
en | 8-5
LBB 3512/00 Data Distribution Board
8.1.4 Interconnection for Video hall displays and Video Projectors
Refer to FIG 8-9.
To display information on a Video hall display or Video projector:
Use the VGA/SVGA output of a client computer, other than the one used as the main DCN central
computer. The client PC, with video display (client) software package, is connected to the main DCN
PC (server) via an Ethernet link.
• The data information is transported by means of the DDE-link (Dynamic Data Exchange). For
hardware information see Chapter 10..
• The ‘Video Display’ software package LBB 3584 has to be installed in the DCN PC (server) only.
The LBB 3590 start-up does not need to be installed on the client PC.
FIG 8-9 Interconnection Hall Display and Video Projector
To other video displays
CLIENT PC DCN PC (Server‘)
DCN Control PC
Ethernet link
from DCN PC
VIDEO HALL DISPLAY VIDEO PROJECTOR