User's Manual

MM Remote Interface Description en | 7
Bosch Security Systems B.V. | 2003 December | MM Remote Interface Description
Mode Mode description & Group enable/disable
OPERATOR WITH REQUEST LIST
equals
MM_C_OPERATOR_WITH_REQ_LIST
Manual mode. The operator (using the remote
controller) controls the RTS list. Delegates are always
added to the RTS list and the operator determines
which delegate may speak.
Special features are to disable the cancel of an
request and to turn off the microphone by the
delegates (see section 3.2.7)
• enables all RTS functions/notifications
• enables all SPK functions/notifications
• disables all CR functions/notifications
• disables all CS functions/notifications
DELEGATE WITH REQUEST LIST
equals
MM_C_DELEGATE_WITH_REQ_LIST
Open delegate mode. All functions can be done by
either the operator or the delegates. When a delegate
turns his microphone off and there are still delegates
present in the RTS list, then an automatic shift will
take place.
Special features are to disable the cancel of an
request.
• enables all RTS functions/notifications
• enables all SPK functions/notifications
• disables all CR functions/notifications
• disables all CS functions/notifications
DELEGATE WITH OVERRIDE
equals
MM_C_DELEGATE_WITH_OVERRIDE
Override mode. In this mode there is no RTS-list.
Whenever a delegate presses his micro-button, he is
directly able to speak. When the SPK list was full, then
the oldest speaker will be removed to make place for
the new delegate.
• disables all RTS functions/notifications
• enables all SPK functions/notifications
• disables all CR functions/notifications
• disables all CS functions/notifications
DELEGATE WITH VOICE ACTIVATION
equals
MM_C_DELEGATE_WITH_VOICE
Voice mode. The CCU automatic focus on the
delegate currently speaking. In this mode there is no
RTS list and SPK list. Also none of the chairmen
microphones will be notified.
• disables all RTS functions/notifications
• disables all SPK functions/notifications
• disables all CR functions/notifications
• disables all CS functions/notifications
• disables all microphone on/off functions
OPERATOR WITH REQUEST AND
RESPONSE LIST
equals
MM_C_OPERATOR_WITH_COMMENT_
LIST
Comment mode. The operator (using the remote
controller) controls the RTS and CR lists. Delegates
are always added to the RTS list for normal requests
and to the CR list for responses. The operator
determines which delegate may speak and/or make a
response. In this mode the maximum number of active
microphones must be set to 1.
Special features are to disable the cancel of an
request and to turn off the microphone by the
delegates (see section 3.2.7)
• enables all RTS functions/notifications
• enables all CR functions/notifications
• enables all SPK functions/notifications
• enables all CS functions/notifications
The SPK functions and notifications mentioned in the table are described in respectively. sections 3.3 and
4.3.
The CS functions and notifications mentioned in the table are described in respectively. sections 3.4 and 4.4.