user manual
D8125MUX | Operation and Installation Guide | 3.0 Installation
.
Bosch Security Systems, Inc. | 9/08 | F01U034973-02 11
Table 7: Point Conversion Table
If Zonex
2 Pt. # is
Program
as
If Zonex
2 Pt. # is
Program
as
If Zonex
2 Pt. # is
Program
as
If Zonex
2 Pt. # is
Program
as
If Zonex
2 Pt. # is
Program
as
129 9 153 33 177 57 201 81 225 105
130 10 154 34 178 58 202 82 226 106
131 11 155 35 179 59 203 83 227 107
132 12 156 36 180 60 204 84 228 108
133 13 157 37 181 61 205 85 229 109
134 14 158 38 182 62 206 86 230 110
135 15 159 39 183 63 207 87 231 111
136 16 160 40 184 64 208 88 232 112
137 17 161 41 185 65 209 89 233 113
138 18 162 42 186 66 210 90 234 114
139 19 163 43 187 67 211 91 235 115
140 20 164 44 188 68 212 92 236 116
141 21 165 45 189 69 213 93 237 117
142 22 166 46 190 70 214 94 238 118
143 23 167 47 191 71 215 95 239 119
144 24 168 48 192 72 216 96 240 120
145 25 169 49 193 73 217 97 241 121
146 26 170 50 194 74 218 98 242 122
147 27 171 51 195 75 219 99 243 123
148 28 172 52 196 76 220 100 244 124
149 29 173 53 197 77 221 101 245 125
150 30 174 54 198 78 222 102 246 126
151 31 175 55 199 79 223 103 247 127
152 32 176 56 200 80 224 104
3.8 Point Matrix Tables
Only use one D8125MUX per zonex output. Refer to Table 8 beginning on page 12 for Zonex 1. Refer to Table
9
beginning on page 14 for Zonex 2
If configuring the system with DS7457i, DS7461i, or DS7465i MUX devices. Refer to
Table 10 on page 16 if
configuring the system with the DS7460iMUX device.
The type of multiplex device used determines the quantity of devices you can connect to the D8125MUX. Do
not program two multiplex points to the same point number. After programming all the points, perform a
Service Walk Test. Refer to the control panel’s operation and installation guide for information on the Service
Walk Test. If a multiplex point is not functioning, check for duplicate addresses.
Two sheets of peel-off labels are supplied with the D8125MUX. Each label has two parts. Place the smaller
part (with the point number) on the multiplex point. Throw away the larger part. Use the sheet marked Bank 1
for Points 9 through 127 and the sheet marked Bank 2 for Points 129 through 247. The D7412GV2,
D7212GV2, D7412G, D7212G, D7412, and D7212 Control Panels use the sheet marked Bank 1.