user manual

D8125MUX | Operation and Installation Guide | 3.0 Installation
18 Bosch Security Systems, Inc. | 10/09 | F01U034973-02
Table 10: DS7460i Switch Settings When
Using D8125MUX
(continued)
Address
Zone/Relay
Switch Number (
= ON)
1 2 3 4 5 6 7 8
189/190
191/192
193/194
195/196
197/198
199/200
201/202
203/204
205/206
207/208
209/210
211/212
213/214
215/216
217/218
219/220
221/222
223/224
225/226
227/228
229/230
231/232
233/234
235/236
237/238
239/240
241/242
243/244
245/246
247/248 NOT USED
3.9 Single Input Multiplex Devices
The devices listed in Table 10 reserve a single point
on the MUX bus. Single Input Multiplex points can be
programmed as Points 9 through 127 (Zonex 1) and
129 through 247 (Zonex 2) (238 devices) on the
D9412GV2, D9412G, D9412, and D9112; Points 9
through 75 (67 devices) on the D7412GV2, D7412G,
D7412, and D7212; Points 9 through 40 on the
D7212GV2 and D7212G (32 devices). When
programming the point type for Single Input Multiplex
points using a D5060 Programmer, refer to
Table 11
for information on how to configure the point type.
Tamper conditions on multiplex points are treated as
Missing conditions by the control panel.
Table 11: Single Input Multiplex Device Point
Response Configuration
Device Type Point
Type
Point
Response
DS7450 Flush Mount Single
Multiplex Contact Point
1 NO
DS7452 Surface Mount Single
Multiplex Contact Point
1 NO
DS7457 Single Multiplex Input
Module
2 Configurable
(NO or NC)
MX775 (DS7470) Multiplex
PIR Intrusion Detector - 50 ft
(15 m) Mirror
2 NO
MX934 (DS7471) Multiplex
PIR Intrusion Detector - 35 ft
(11 m) Mirror
2 NO
MX938 (DS7472) Ceiling
Mount Multiplex PIR Intrusion
Detector
2 NO
MX540 (DS7473) Multiplex
PIR Intrusion Detector - 40 ft.
(12 m) Fresnel Lens
2 NO
MX794 (DS7474) Multiplex
Long Range PIR Intrusion
Detector
2 NO
MX950 (DS7476) Multiplex
PIR/Microwave TriTech
Intrusion Detector
2 NO
MX835 (DS7477) Multiplex
PIR/Microwave TriTech
Intrusion Detector with Pet
Immunity
2 NO