Installation Instruction

en-us
21
9. Close the door and check the side alignment.
Correct by gently tapping the edge of the open
door panel with your hand.
10. Screw nuts onto the double threaded bolts and
tighten. This will fix the side alignment of the door.
10. Attaching the lower bracket
The lower bracket fixes the side position of the door.
The number of lower brackets depends on the width
and the design of the door panel.
Screw on the lower brackets (Installation kit).
Predrill holes in the door panel!
1. Loosen the screw.
2. Push the bracket over the screw.
3. Check the side position of the door.
4. Screw in the screw.
5. Tighten the screw.
6. Put the cover on the brackets.