Installation Instruction

en-us
22
11. Attaching the strips
1. Attach the cover strip (a) on the door.
2. Attach the light switch cover.
The cover can be screwed to the door.
Side-by-Side installation only:
Insert the cover strip into the space between the
appliances.
The cover rail is included in the installation accessories
for side-by-side installation.
12. Mounting the air separator
Using the air separator, air which is supplied and
drawn from the appliance is fed separately, in order to
avoid reduced operating capacity.
13. Adjusting the door spring
Rotate the adjusting screw with a cross-head
screwdriver.
I = maximum spring tension
0 = no spring tension
The following are special installation
steps. Instructions are provided after
chapter C.
ʋ Door limitation pin, see “Adjusting
the door opening angle”.
Installation of the appliance is now
complete.