Installation Instructions

Table Of Contents

Electrical connection en-us

max. 2¾" (69mm) + fitting/conduit 1" (25mm)

min. 1" (25mm) air clearance

approx. 12" (300mm)

junction box

flexible conduit approx. 3ft. (900mm)

Power supply

All models must be connected with the included 39" (1m) flexible conduit.

Models 240V AC, 3-wire, 60Hz system: cir-

cuit breaker

208V AC, 3-wire, 60Hz system: cir-

cuit breaker

NIT5060UC 30A 30A

NIT8060SUC 30A 30A

NIT8060UC 30A 30A

NITP060SUC 30A 30A

NITP060UC 30A 30A

NIT5660UC 40A 40A

NIT8660SUC 40A 40A

NIT8660UC 40A 40A

NITP660SUC 50A 50A

NITP660UC 50A 50A

NIT5460UC 30A 30A

5.2 Connecting electrical supply

WARNING

Before installing, turn power OFF at the service panel.

▶

Lock service panel to prevent power from being turned

ON accidentally.

Note:If the cooktop is installed and connected as speci-

fied here, it will be grounded in compliance with the Na-

tional Electrical Code.

1. Install a suitable junction box (not furnished).

The branch-circuit breakers ampacity, the wire sizes

and the connections must conform to the requirements

of the National Electrical Code or Canadian Electrical

Code and all local codes and ordinances.

2. Attach the flexible conduit to the junction box.