Use and Care Manual
Table Of Contents
- Cooktop
- Table of Contents Use and care manual
- Produktinfo
- 9 Safety DefinitionsSafety Definitions
- IMPORTANT SAFETY INSTRUCTIONS
- READ AND SAVE THESE INSTRUCTIONS
- WARNING
- Fire Safety
- WARNING
- to reduce the risk of a grease fire:
- a. Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.
- b. Always turn hood ON when cooking at high heat or when flambéing food (i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambé).
- c. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.
- d. Use proper pan size. Always use cookware appropriate for the size of the surface element.
- WARNING
- TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A GREASE FIRE, OBSERVE THE FOLLOWING:
- a. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.
- b. NEVER PICK UP A FLAMING PAN – You may be burned.
- c. DO NOT USE WATER, including wet dishcloths or towels – a violent steam explosion will result.
- d. Use an extinguisher ONLY if:
- Cooking Safety
- Burn Prevention
- Child Safety
- Cleaning Safety
- Cookware Safety
- Proper Installation and Maintenance
- Electromagnetic interference
- Cooling fan
- Proposition 65 Warning:
- Causes of damage
- Protecting the Environment
- Cooking with Induction
- Getting familiar with the appliance
- Operation
- READ AND SAVE THESE INSTRUCTIONS
- Settings table
- 9 CAUTION
- FlexInduction® Cooking Zone
- Cookware use recommendations
- As two independent cooking zones
- As a single cooking zone
- Separating the two cooking zones
- Setting procedure:
- Using Cook timer with AutoChef®
- Changing or deleting the time
- When the time has elapsed
- Setting procedure
- Changing or deleting the time
- When the time has elapsed
- Activating
- Deactivating
- Activation
- Deactivating
- Activating
- Deactivating
- Recommendations for use
- Activating
- Deactivating
- Activating
- Deactivating
- Advantages when frying
- Frying pans for AutoChef®
- Frying levels
- AutoChef® Frying Chart
- Teppan Yaki for the Flex Zone
- Note:
- Setting procedure
- Activating and deactivating the panel lock
- Automatic panel lock
- To access the basic settings:
- Home Connect
- Notes
- Setting Up
- Automatic Registration in the Home Network
- 1. Turn on the cooktop.
- 2. Touch and hold the kitchen timer key for 4 seconds.
- 3. Touch the kitchen timer key repeatedly until •’ and ‚ are displayed alternately.
- 4. Set the ‚ value on the control panel.
- 5. Press the WPS button on the router within the next 2 minutes.
- Manual Registration in the Home Network
- 1. Turn on the cooktop.
- 2. Touch and hold the kitchen timer key for 4 seconds.
- 3. Touch the kitchen timer key repeatedly until •’ and ‚ are displayed alternately.
- 4. Set the ƒ value on the control panel.
- 5. Use the "Home Connect" SSID and the "Home Connect" key to register the mobile device on the cooktop network.
- Deactivating Wi-Fi
- Disconnecting from the Network
- Connecting to the networkConnecting to the network
- Connect to App
- Settings via app
- Confirming settings
- FCC COMPLIANCE STATEMENT
- INDUSTRY CANADA STATEMENT
- Cooktop - Hood Sync
- Notes
- Setting up a connection
- Connecting directly
- Connecting via your home network
- 1. Turn on the cooktop.
- 2. Touch and hold the kitchen timer key for 4 seconds.
- 3. Touch the kitchen timer key repeatedly until ™ and ‚‡ are displayed alternately.
- 4. Set the value ‚ in the settings area.
- 5. If the appliance is not yet connected to your home network, press the WPS button on the router within the next 2 minutes.
- 6. Initiate the process for connecting to the hood.
- 7. Once the cooktop is connected to the hood, the value „ appears in the cooking position display. After you exit the settings menu, the symbols for the cooktop- based hood controls are displayed in the cooktop's control panel.
- Note:
- Disconnecting from the Network
- 2. Touch and hold the kitchen timer key for 4 seconds.
- Setting the fan
- Setting Automatic Mode
- Setting the hood lighting
- Cleaning and Maintenance
- Service
- Frequently-asked questions and answers (FAQ)
- Fixing Malfunctions
- Suitability test of cookware
- STATEMENT OF LIMITED PRODUCT WARRANTY
- Table des Matières Notice d’utilisation
- Produktinfo
- 9 Définitions de sécuritéDéfinitions de sécurité
- CONSIGNES DE SÉCURITÉ IMPORTANTES
- LIRE ET CONSERVER CES INSTRUCTIONS
- AVERTISSEMENT
- Sécurité-incendie
- AVERTISSEMENT
- POUR RÉDUIRE LES RISQUES DE FEUX DE GRAISSE :
- a. Ne jamais faire fonctionner les unités de surface à des températures élevées sans surveillance. Des débordements causant de la fumée et des déversements graisseux peuvent prendre feu. Chauffer l'huile lentement à réglage faible ou moyen.
- b. Mettre toujours la hotte EN MARCHE pendant la cuisson à température élevée et au moment de flamber des aliments (p.ex., crêpes Suzette, cerises jubilée, steak au poivre flambé).
- c. Nettoyer souvent les ventilateurs d'aération. Il ne faut pas que la graisse s'accumule sur le ventilateur ou sur le filtre.
- d. Utiliser des casseroles de taille adéquate. Utiliser toujours des casseroles dont les dimensions conviennent à la taille de l'élément.
- AVERTISSEMENT
- POUR RÉDUIRE LE RISQUE DE LÉSIONS CORPORELLES DANS L'ÉVENTUALITÉ D'UN FEU DE GRAISSE, OBSERVER LES CONSIGNES SUIVANTES :
- a. ÉTOUFFER LES FLAMMES à l'aide d'un couvercle bien hermétique, d'une tôle à biscuits ou d'un plateau en métal, puis éteindre l'appareil. FAIRE ATTENTION À NE PAS SE BRÛLER. Si les flammes ne s'éteignent pas immédiatement, ÉVACUER LES LI...
- b. NE JAMAIS SAISIR UN RÉCIPIENT QUI BRÛLE. Vous pourriez vous brûler.
- c. NE PAS UTILISER D'EAU, y compris les chiffons ou serviettes mouillées. Une violente explosion de vapeur risque de se produire.
- d. Utiliser un extincteur uniquement si :
- Sécurité de cuisson
- Prévention des brûlures
- Sécurité des enfants
- Consignes en matière de nettoyage
- Sécurité pour la batterie de cuisine
- Installation et entretien corrects
- Perturbations électromagnétiques
- Ventilateur de refroidissement
- Avertissement issu de la proposition 65 :
- Éléments qui peuvent endommager l'appareil
- Protection de l'Environnement
- Cuisson par Induction
- Faire connaissance avec l’appareil
- Fonctionnement
- LIRE ET CONSERVER CES INSTRUCTIONS
- Tableau des réglages
- 9 ATTENTION
- Zone de cuisson FlexInductionMD
- Recommandations d'utilisation de l'ustensile de cuisson
- En tant que deux foyers indépendants
- En tant que foyer unique
- Séparation des deux zones de cuisson
- Réglages :
- Utilisation de la Minuterie de cuisson avec AutoChef®
- Modification ou annulation du temps
- Une fois que le temps s'est écoulé,
- Procédure de réglage
- Modification ou annulation du temps
- Une fois que le temps s'est écoulé
- Activation
- Désactivation
- Activer
- Désactiver
- Activation
- Désactivation
- Recommandations d'utilisation
- Activation
- Désactivation
- Activation
- Désactivation
- Avantages lors du rôtissage
- Poêles à frire convenant à AutoChefMD
- Niveaux de friture
- Tableau de friture avec AutoChef®
- Teppanyaki pour zone Flex
- Remarque :
- Réglages
- Activation et désactivation du verrouillage du panneau
- Verrouillage automatique du panneau
- Pour accéder aux réglages de base :
- 1. Allumez la table de cuisson.
- 2. Dans les 10 secondes qui suivent, effleurez kitchen timer pendant près de 4 secondes.
- 3. Effleurez la touche kitchen timer de nouveau pour revenir aux réglages de base.
- 4. Effleurez la touche kitchen timer à plusieurs reprises jusqu’à l’apparition de la fonction requise.
- 5. Puis sélectionnez le réglage requis à partir de la zone de réglages.
- 6. Effleurez la touche kitchen timer pendant au moins 4 secondes.
- Sortie des réglages de base
- Indicateur de consommation énergétique
- Gestion de puissance
- Home Connect
- Remarques
- Configuration
- Connexion automatique au réseau domestique
- 1. Allumez la table de cuisson.
- 2. Effleurez la touche kitchen timer et tenez-la enfoncée pendant 4 secondes.
- 3. Effleurez la touche kitchen timer à plusieurs reprises jusqu’à ce que •’ et ‚ sont affichés en alternance.
- 4. Réglez la valeur du symbole ‚ sur le panneau de commande.
- 5. Appuyez sur le bouton du routeur WPS dans les 2 prochaines minutes.
- Connexion manuelle au réseau domestique
- 1. Allumez la table de cuisson.
- 2. Effleurez la touche kitchen timer et tenez-la enfoncée pendant 4 secondes.
- 3. Effleurez la touche kitchen timer à plusieurs reprises jusqu’à ce que •’ et ‚ sont affichés en alternance.
- 4. Réglez la valeur du symbole ƒ sur le panneau de commande.
- 5. Utilisez le SSID « Home Connect » et la clé « Home Connect » pour enregistrer l’appareil mobile au réseau de la table de cuisson.
- Désactivation du Wi-Fi
- Se déconnecter du réseauSe déconnecter du réseau
- Se connecter au réseauSe connecter au réseau
- Connexion avec l'appli
- Réglages par l'appli
- Confirmer les réglages de cuisson
- DÉCLARATION DE CONFORMITÉ FCC
- AVIS D’INDUSTRIE CANADA
- Table de Cuisson - Synchronisation de la Hotte
- Remarques
- Configuration
- Connexion directe
- Remarque :
- 1. Allumez la table de cuisson.
- 2. Effleurez la touche kitchen timer et tenez-la enfoncée pendant 4 secondes.
- 3. Effleurez la touche kitchen timer à plusieurs reprises jusqu’à ce que ™ et ‚‡ sont affichés en alternance.
- 4. Réglez la valeur du symbole ‚ dans la zone de réglage.
- Le symbole ‚ clignote à l’écran de l’élément de cuisson.
- 5. Vous disposez de deux minutes pour lancer le processus de connexion sur la hotte.
- 6. Une fois la table de cuisson connectée à la hotte, le symbole „ s’affiche à l’écran de l’élément de cuisson. Après avoir quitté le menu de réglages, les symboles des commandes de la hotte de la table de cuisson apparaissent sur le...
- Le symbole ‚ clignote à l’écran de l’élément de cuisson.
- Connexion par le réseau domestique
- 1. Allumez la table de cuisson.
- 2. Effleurez la touche kitchen timer et tenez-la enfoncée pendant 4 secondes.
- 3. Effleurez la touche kitchen timer à plusieurs reprises jusqu’à ce que ™ et ‚‡ sont affichés en alternance.
- 4. Réglez la valeur du symbole ‚ dans la zone de réglage.
- 5. Si l’appareil électroménager n’est pas encore connecté au réseau domestique, appuyez sur le bouton WPS du routeur dans les 2 prochaines minutes.
- 6. Lancez le processus de connexion à la hotte.
- 7. Une fois la table de cuisson connectée à la hotte, le symbole „ s’affiche à l’écran de l’élément de cuisson. Après avoir quitté le menu de réglages, les symboles des commandes de la hotte de la table de cuisson apparaissent sur le...
- Remarque :
- Se déconnecter du réseauSe déconnecter du réseau
- 2. Effleurez la touche kitchen timer et tenez-la enfoncée pendant 4 secondes.
- Régler le ventilateur
- Régler le mode automatique
- Régler l’éclairage de la hotte
- Nettoyage et entretien
- Entretien
- Foire aux questions (FAQ)
- Corrections des défaillances
- Test de la vaisselle
- ÉNONCÉ DE LA GARANTIE LIMITÉE
36
STATEMENT OF LIMITED PRODUCT WARRANTY
What this Warranty Covers & Who it
Applies to
The limited warranty provided by BSH Home Appliances
Corporation (“BSH“) in this Statement of Limited Product
Warranty applies only to the Bosch appliance (“Product“)
sold to you, the first using purchaser, provided that the
Product was purchased:
▯ For your normal, household (non-commercial) use,
and has in fact at all times only been used for normal
household purposes.
▯ New at retail (not a display, "as is", or previously
returned model), and not for resale, or commercial
use.
▯ Within the United States or Canada, and has at all
times remained within the country of original purchase.
The warranties stated herein apply only to the first
purchaser of the Product and are not transferable.
Please make sure to return your registration card; while
not necessary to effectuate warranty coverage, it is the
best way for BSH to notify you in the unlikely event of a
safety notice or product recall.
How Long the Warranty Lasts
BSH warrants that the Product is free from defects in
materials and workmanship for a period of three hundred
sixty-five (365) days from the date of purchase. The
foregoing timeline begins to run upon the date of
purchase, and shall not be stalled, tolled, extended, or
suspended, for any reason whatsoever.
This Product is also warranted to be free from cosmetic
defects in material and workmanship (such as scratches
of stainless steel, paint/porcelain blemishes, chip, dents,
or other damage to the finish of the Product), for a period
of thirty (30) days from the date of purchase or closing
date for new construction. This cosmetic warranty
excludes slight color variations due to inherent
differences in painted and porcelain parts, as well as
differences caused by kitchen lighting, product location,
or other similar factors. This cosmetic warranty
specifically excludes any display, floor, “As Is”, or “B”
stock appliances.
Repair/Replace as Your Exclusive Remedy
During this warranty period, BSH or one of its authorized
service providers will repair your Product without charge
to you (subject to certain limitations stated herein) if your
Product proves to have been manufactured with a defect
in materials or workmanship. If reasonable attempts to
repair the Product have been made without success,
then BSH will replace your Product (upgraded models
may be available to you, in BSH’s sole discretion, for an
additional charge). All removed parts and components
shall become the property of BSH at its sole option. All
replaced and/or repaired parts shall assume the identity
of the original part for purposes of this warranty and this
warranty shall not be extended with respect to such
parts. BSH's sole liability and responsibility hereunder is
to repair manufacturer-defective Product only, using a
BSH-authorized service provider during normal business
hours. For safety and property damage concerns, BSH
highly recommends that you do not attempt to repair the
Product yourself, or use an un-authorized servicer; BSH
will have no responsibility or liability for repairs or work
performed by a non-authorized servicer. If you choose to
have someone other than an authorized service provider
work on your Product, THIS WARRANTY WILL
AUTOMATICALLY BECOME NULL AND VOID. Authorized
service providers are those persons or companies that
have been specially trained on BSH products, and who
possess, in BSH's opinion, a superior reputation for
customer service and technical ability (note that they are
independent entities and are not agents, partners,
affiliates or representatives of BSH). Notwithstanding the
foregoing, BSH will not incur any liability, or have
responsibility, for the Product if it is located in a remote
area (more than 100miles from an authorized service
provider) or is reasonably inaccessible, hazardous,
threatening, or treacherous locale, surroundings, or
environment; in any such event, if you request, BSH
would still pay for labor and parts and ship the parts to
the nearest authorized service provider, but you would
still be fully liable and responsible for any travel time or
other special charges by the service company, assuming
they agree to make the service call.
Out of Warranty Product
BSH is under no obligation, at law or otherwise, to
provide you with any concessions, including repairs, pro-
rates, or Product replacement, once this warranty has
expired.
Warranty Exclusions
The warranty coverage described herein excludes all
defects or damage that are not the direct fault of BSH,
including without limitation, one or more of the following:
▯ Use of the Product in anything other than its normal,
customary and intended manner (including without
limitation, any form of commercial use, use or storage
of an indoor product outdoors, use of the Product in
conjunction with air or water-going vessels).
▯ Any party's willful misconduct, negligence, misuse,
abuse, accidents, neglect, improper operation, failure
to maintain, improper or negligent installation,
tampering, failure to follow operating instructions,
mishandling, unauthorized service (including self-
performed "fixing" or exploration of the appliance's
internal workings).
▯ Adjustment, alteration or modification of any kind.
▯ A failure to comply with any applicable state, local,
city, or county electrical, plumbing and/or building
codes, regulations, or laws, including failure to install
the product in strict conformity with local fire and
building codes and regulations.
▯ Ordinary wear and tear, spills of food, liquid, grease
accumulations, or other substances that accumulate
on, in, or around the Product.










