Use and Care Manual

15
3. Within the next 10 seconds, set the required cooking
time using the number keys.
4. Touch the cook timer key to confirm the selected
setting.
The cooking time begins to elapse.
Note: The same cooking time can be set automatically
for all cooking zones. The set time for each of the
cooking zones counts down independently.
You can find information on automatically programming
the cooking time in section ~ "Basic settings"
Using Cook timer with AutoChef
®
When you are cooking with AutoChef
®
the programmed
cooking time will begin to count down once the
temperature for the selected frying level has been
reached.
Changing or deleting the time
Select the cooking zone and then touch the cook timer
key.
Change the cooking time using the number keys or set
‹‹ to delete the programmed cooking time.
Touch the cook timer key to confirm the selected setting.
When the time has elapsed
The cooking zone switches off, the y display flashes
and the cooking zone switches to power level ‹‹. An
acoustic signal sounds.
‹‹ and the V indicator flash in the timer display.
When the y symbol is touched, the indicators go out
and the acoustic signal ceases.
Notes
▯ To set a cooking time of under 10minutes, always
touch 0 before you select the required value.
▯ If a cooking time was set for several cooking zones,
the time information for the selected cooking zone is
shown in the timer display.
▯ Select the relevant cooking zone to call up the
remaining cooking time.
▯ You can set a cooking time of up to ŠŠ minutes.
Kitchen Timer
The Kitchen Timer can be set for periods of up to
ŠŠ minutes. It is independent of the other settings. You
can also use the kitchen timer when the cooktop is
turned off or locked.
This function does not automatically switch off a cooking
zone.
Setting procedure
1. Touch the kitchen timer key. The ‹‹ symbol and the
V indicator light up in the timer display.
2. Select the required time on the control panel and
touch the kitchen timer key to confirm.
After a few seconds, the time begins to elapse.
Changing or deleting the time
Touch the kitchen timer key.
Change the programmed time using the number keys or
set
‹‹ to delete the programmed time.
Touch the kitchen timer key to confirm the selected
setting.
When the time has elapsed
An audible signal sounds once the time has elapsed. ‹‹
and the V symbol flash in the timer display.
The indicators go out after touching the kitchen timer
key.
Count Up Timer
The count up timer function displays the time that has
elapsed since activation.
This functions independently from the cooking zones and
from other settings. This function does not automatically
switch off a cooking zone.
Activating
Touch the count up timer key. The ‹‹ symbol and the
V indicator light up in the timer display.
The time begins to count up.
Deactivating
Touching the count up timer key turns off the stopwatch
function. The timer displays remain lit.
If you touch the count up timer key again, the displays
go out.
The function is deactivated.
VSHHG
ERRVW
NLWFKHQ
WLPHU
FRRN
WLPHU
FRXQWXS
WLPHU
DXWR
FKHI
SRZHU
PRYH
IOH[
MRLQVSOLW
