Use and Care Manual
Table Of Contents
- Cooktop
- Table of Contents Use and care manual
- Produktinfo
- 9 Safety DefinitionsSafety Definitions
- IMPORTANT SAFETY INSTRUCTIONS
- READ AND SAVE THESE INSTRUCTIONS
- WARNING
- Fire Safety
- WARNING
- to reduce the risk of a grease fire:
- a. Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.
- b. Always turn hood ON when cooking at high heat or when flambéing food (i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambé).
- c. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.
- d. Use proper pan size. Always use cookware appropriate for the size of the surface element.
- WARNING
- TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A GREASE FIRE, OBSERVE THE FOLLOWING:
- a. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.
- b. NEVER PICK UP A FLAMING PAN – You may be burned.
- c. DO NOT USE WATER, including wet dishcloths or towels – a violent steam explosion will result.
- d. Use an extinguisher ONLY if:
- Cooking Safety
- Burn Prevention
- Child Safety
- Cleaning Safety
- Cookware Safety
- Proper Installation and Maintenance
- Electromagnetic interference
- Cooling fan
- Proposition 65 Warning:
- Causes of damage
- Protecting the Environment
- Cooking with Induction
- Getting familiar with the appliance
- Operation
- READ AND SAVE THESE INSTRUCTIONS
- Settings table
- 9 CAUTION
- FlexInduction® Cooking Zone
- Cookware use recommendations
- As two independent cooking zones
- Turning on
- As a single cooking zone
- Linking the two cooking zones
- Changing the power level
- Add another piece of cookware
- Separating the two cooking zones
- Activation
- Changing the power level
- Deactivating
- Setting procedure:
- Using Cook timer with AutoChef®
- Changing or deleting the time
- When the time has elapsed
- Setting procedure
- Changing or deleting the time
- When the time has elapsed
- Activating
- Deactivating
- Activating
- Deactivating
- Recommendations for use
- Activating
- Deactivating
- Activating
- Deactivating
- Advantages when frying
- Frying pans for AutoChef®
- Frying levels
- AutoChef® Frying Chart
- Teppan Yaki for the Flex Zone
- Note:
- Setting procedure
- 1. Select the cooking zone. Touch auto chef. é lights up in the cooking zone display.
- The function has now been activated.
- The é temperature symbol flashes until the frying temperature is reached. A signal sounds and the temperature symbol goes out.
- 3. Once the frying temperature has been reached, add the fat and then the food to the pan.
- Switching off AutoChef®
- Activating and deactivating the panel lock
- Automatic panel lock
- Activating and deactivating
- To access the basic settings:
- Quit basic settings
- Home Connect
- Notes
- Setting Up
- Automatic Registration in the Home Network
- 1. Turn on the cooktop.
- 2. Touch and hold the kitchen timer key for 4 seconds.
- 3. Touch the kitchen timer key repeatedly until •’ and ‚ are displayed alternately.
- 4. Set the ‚ value on the control panel.
- 5. Press the WPS button on the router within the next 2 minutes.
- Manual Registration in the Home Network
- 1. Turn on the cooktop.
- 2. Touch and hold the kitchen timer key for 4 seconds.
- 3. Touch the kitchen timer key repeatedly until •’ and ‚ are displayed alternately.
- 4. Set the ƒ value on the control panel.
- 5. Use the "Home Connect" SSID and the "Home Connect" key to register the mobile device on the cooktop network.
- Deactivating Wi-Fi
- Disconnecting from the Network
- Connecting to the networkConnecting to the network
- Connect to App
- Settings via app
- Confirming settings
- FCC COMPLIANCE STATEMENT
- INDUSTRY CANADA STATEMENT
- Cooktop - Hood Sync
- Notes
- Setting up a connection
- Connecting directly
- Note:
- 1. Turn on the cooktop.
- 2. Touch and hold the kitchen timer key for 4 seconds.
- 3. Touch the kitchen timer key repeatedly until ™ and ‚‡ are displayed alternately.
- 4. Set the value ‚ in the settings area.
- 6. Once the cooktop is connected to the hood, the value „ appears in the cooking position display. After you exit the settings menu, the symbols for the cooktop- based hood controls are displayed in the cooktop's control panel.
- Connecting via your home network
- 1. Turn on the cooktop.
- 2. Touch and hold the kitchen timer key for 4 seconds.
- 3. Touch the kitchen timer key repeatedly until ™ and ‚‡ are displayed alternately.
- 4. Set the value ‚ in the settings area.
- 5. If the appliance is not yet connected to your home network, press the WPS button on the router within the next 2 minutes.
- 7. Once the cooktop is connected to the hood, the value „ appears in the cooking position display. After you exit the settings menu, the symbols for the cooktop- based hood controls are displayed in the cooktop's control panel.
- 2. Touch and hold the kitchen timer key for 4 seconds.
- Setting the fan
- Activation
- Deactivating
- Setting Automatic Mode
- Activation
- Deactivating
- Setting the hood lighting
- Cleaning and Maintenance
- Service
- Frequently-asked questions and answers (FAQ)
- Fixing Malfunctions
- Suitability test of cookware
- STATEMENT OF LIMITED PRODUCT WARRANTY
- Table des Matières Notice d’utilisation
- Produktinfo
- 9 Définitions de sécuritéDéfinitions de sécurité
- CONSIGNES DE SÉCURITÉ IMPORTANTES
- LIRE ET CONSERVER CES INSTRUCTIONS
- AVERTISSEMENT
- Sécurité-incendie
- AVERTISSEMENT
- POUR RÉDUIRE LES RISQUES DE FEUX DE GRAISSE :
- a. Ne jamais faire fonctionner les unités de surface à des températures élevées sans surveillance. Des débordements causant de la fumée et des déversements graisseux peuvent prendre feu. Chauffer l'huile lentement à réglage faible ou moyen.
- b. Mettre toujours la hotte EN MARCHE pendant la cuisson à température élevée et au moment de flamber des aliments (p.ex., crêpes Suzette, cerises jubilée, steak au poivre flambé).
- c. Nettoyer souvent les ventilateurs d'aération. Il ne faut pas que la graisse s'accumule sur le ventilateur ou sur le filtre.
- d. Utiliser des casseroles de taille adéquate. Utiliser toujours des casseroles dont les dimensions conviennent à la taille de l'élément.
- AVERTISSEMENT
- POUR RÉDUIRE LE RISQUE DE LÉSIONS CORPORELLES DANS L'ÉVENTUALITÉ D'UN FEU DE GRAISSE, OBSERVER LES CONSIGNES SUIVANTES :
- a. ÉTOUFFER LES FLAMMES à l'aide d'un couvercle bien hermétique, d'une tôle à biscuits ou d'un plateau en métal, puis éteindre l'appareil. FAIRE ATTENTION À NE PAS SE BRÛLER. Si les flammes ne s'éteignent pas immédiatement, ÉVACUER LES LI...
- b. NE JAMAIS SAISIR UN RÉCIPIENT QUI BRÛLE. Vous pourriez vous brûler.
- c. NE PAS UTILISER D'EAU, y compris les chiffons ou serviettes mouillées. Une violente explosion de vapeur risque de se produire.
- d. Utiliser un extincteur uniquement si :
- Sécurité de cuisson
- Prévention des brûlures
- Sécurité des enfants
- Consignes en matière de nettoyage
- Sécurité pour la batterie de cuisine
- Installation et entretien corrects
- Perturbations électromagnétiques
- Ventilateur de refroidissement
- Avertissement issu de la proposition 65 :
- Éléments qui peuvent endommager l'appareil
- Protection de l'Environnement
- Cuisson par Induction
- Avantages lors de la cuisson par induction
- Ustensiles de cuisson
- Ustensile de cuisson non adapté
- Caractéristiques du fond du récipient
- Casserole manquante ou de taille inappropriée
- Casseroles vides ou casseroles à base mince
- Détection du récipient
- Détection automatique en cas de foyers à deux ou trois zones
- Faire connaissance avec l’appareil
- Fonctionnement
- LIRE ET CONSERVER CES INSTRUCTIONS
- Tableau des réglages
- 9 ATTENTION
- Zone de cuisson FlexInductionMD
- Recommandations d'utilisation de l'ustensile de cuisson
- En tant que deux foyers indépendants
- Activation
- En tant que foyer unique
- Liaison de deux zones de cuisson
- Modification du niveau de puissance
- Ajout d’un autre ustensile de cuisson
- Séparation des deux zones de cuisson
- Activer
- Modification du niveau de puissance
- Désactiver
- Réglages :
- Utilisation de la Minuterie de cuisson avec AutoChef®
- Modification ou annulation du temps
- Une fois que le temps s'est écoulé,
- Procédure de réglage
- Modification ou annulation du temps
- Une fois que le temps s'est écoulé
- Activation
- Désactivation
- Activation
- Désactivation
- Recommandations d'utilisation
- Activation
- Désactivation
- Activation
- Désactivation
- Avantages lors du rôtissage
- Poêles à frire convenant à AutoChefMD
- Niveaux de friture
- Tableau de friture avec AutoChef®
- Teppanyaki pour zone Flex
- Remarque :
- Réglages
- 1. Sélectionnez la zone de cuisson. Effleurez auto chef. Le symbole é s’allume à l’écran de la zone de cuisson.
- La fonction est activée.
- Le symbole é de température clignote jusqu’à ce que la température de friture soit atteinte. Un signal retentit et le symbole de température disparaît.
- 3. Quand la température de rôtissage est atteinte, commencez par mettre l'huile, puis les aliments dans la poêle.
- Mise hors fonction d’AutoChef®
- Activation et désactivation du verrouillage du panneau
- Verrouillage automatique du panneau
- Activer et désactiver
- Pour accéder aux réglages de base :
- Sortie des réglages de base
- Home Connect
- Remarques
- Configuration
- Connexion automatique au réseau domestique
- 1. Allumez la table de cuisson.
- 2. Effleurez la touche kitchen timer et tenez-la enfoncée pendant 4 secondes.
- 3. Effleurez la touche kitchen timer à plusieurs reprises jusqu’à ce que •’ et ‚ sont affichés en alternance.
- 4. Réglez la valeur du symbole ‚ sur le panneau de commande.
- 5. Appuyez sur le bouton du routeur WPS dans les 2 prochaines minutes.
- Connexion manuelle au réseau domestique
- 1. Allumez la table de cuisson.
- 2. Effleurez la touche kitchen timer et tenez-la enfoncée pendant 4 secondes.
- 3. Effleurez la touche kitchen timer à plusieurs reprises jusqu’à ce que •’ et ‚ sont affichés en alternance.
- 4. Réglez la valeur du symbole ƒ sur le panneau de commande.
- 5. Utilisez le SSID « Home Connect » et la clé « Home Connect » pour enregistrer l’appareil mobile au réseau de la table de cuisson.
- Désactivation du Wi-Fi
- Se déconnecter du réseauSe déconnecter du réseau
- Se connecter au réseauSe connecter au réseau
- Connexion avec l'appli
- Remarques
- 1. Allumez la table de cuisson.
- 2. Effleurez la touche kitchen timer et tenez-la enfoncée pendant 4 secondes.
- 3. Effleurez la touche kitchen timer à plusieurs reprises jusqu’à ce que •’ et ƒ sont affichés en alternance.
- 5. Respectez les directives de l’application pour achever le processus de connexion.
- Réglages par l'appli
- Confirmer les réglages de cuisson
- DÉCLARATION DE CONFORMITÉ FCC
- AVIS D’INDUSTRIE CANADA
- Table de Cuisson - Synchronisation de la Hotte
- Remarques
- Configuration
- Connexion directe
- Remarque :
- 1. Allumez la table de cuisson.
- 2. Effleurez la touche kitchen timer et tenez-la enfoncée pendant 4 secondes.
- 3. Effleurez la touche kitchen timer à plusieurs reprises jusqu’à ce que ™ et ‚‡ sont affichés en alternance.
- 4. Réglez la valeur du symbole ‚ dans la zone de réglage.
- 6. Une fois la table de cuisson connectée à la hotte, le symbole „ s’affiche à l’écran de l’élément de cuisson. Après avoir quitté le menu de réglages, les symboles des commandes de la hotte de la table de cuisson apparaissent sur le...
- Connexion par le réseau domestique
- 1. Allumez la table de cuisson.
- 2. Effleurez la touche kitchen timer et tenez-la enfoncée pendant 4 secondes.
- 3. Effleurez la touche kitchen timer à plusieurs reprises jusqu’à ce que ™ et ‚‡ sont affichés en alternance.
- 4. Réglez la valeur du symbole ‚ dans la zone de réglage.
- 5. Si l’appareil électroménager n’est pas encore connecté au réseau domestique, appuyez sur le bouton WPS du routeur dans les 2 prochaines minutes.
- 7. Une fois la table de cuisson connectée à la hotte, le symbole „ s’affiche à l’écran de l’élément de cuisson. Après avoir quitté le menu de réglages, les symboles des commandes de la hotte de la table de cuisson apparaissent sur le...
- 2. Effleurez la touche kitchen timer et tenez-la enfoncée pendant 4 secondes.
- Régler le ventilateur
- Activer
- Désactiver
- Régler le mode automatique
- Activer
- Désactiver
- Régler l’éclairage de la hotte
- Nettoyage et entretien
- Entretien
- Foire aux questions (FAQ)
- Corrections des défaillances
- Test de la vaisselle
- ÉNONCÉ DE LA GARANTIE LIMITÉE
7
9 IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
Proper Installation and Maintenance
Have the installer show you the location of the circuit
breaker or fuse. Mark it for easy reference.
This appliance must be properly installed and grounded
by a qualified technician. Connect only to properly
grounded outlet. Refer to Installation Instructions for
details.
This appliance is intended for use up to a maximum
height of 13,100 feet (4,000 meters) above sea level.
This appliance is intended for normal family household
use only. It is not approved for outdoor use. See the
Statement of Limited Product Warranty. If you have any
questions, contact the manufacturer.
Do not store or use corrosive chemicals, vapors,
flammables or nonfood products on or near this
appliance. It is specifically designed for use when
heating or cooking food. The use of corrosive chemicals
in heating or cleaning will damage the appliance and
could result in injury.
Do not operate this appliance if it is not working properly,
or if it has been damaged. Contact an authorized
servicer.
Do not cook on a broken cooktop. Cleaning solutions
and spillovers may create a risk of electric shock.
Do not repair or replace any part of the appliance unless
specifically recommended in this manual. Refer all
servicing to a factory authorized service center.
To avoid electrical shock hazard, before servicing the
appliance, switch power off at the service panel and lock
the panel to prevent the power from being switched on
accidentally.
Electromagnetic interference
WARNING
This induction cooktop generates and uses ISM
frequency energy that heats cookware by using an
electromagnetic field. It has been tested and complies
with Part 18of the FCC Rules for ISM equipment. This
induction cooktop meets the FCC requirements to
minimize interference with other devices in residential
installation. Induction cooktops may cause interference
with television or radio reception. If interference occurs,
the user should try to correct the interference by:
▯ Relocating the receiving antenna of the radio or
television.
▯ Increasing the distance between the cooktop and the
receiver.
▯ Connecting the receiver into an outlet different than the
cooktop.
It is the user’s responsibility to correct any interference.
CAUTION
Persons with a pacemaker or similar medical device
should exercise caution when standing near an induction
cooktop while it is in use. Consult your doctor or the
manufacturer of the pacemaker or similar medical device
for additional information about its effects with
electromagnetic fields from an induction cooktop.
Cooling fan
The cooktop is equipped with a cooling fan on its
underside. Should the cooktop lie above a drawer, there
must be no objects or paper in it. They may be sucked in
and compromise the cooling of the appliance or damage
the fan.
There must be a minimum distance of ¾" (20mm)
between the content of the drawer and the fan input.
Proposition 65Warning:
This product may contain a chemical known to the State
of California, which can cause cancer or reproductive
harm. Therefore, the packaging of your product may
bear the following label as required by California:
&DQFHUDQG5HSURGXFWLYH+DUPZZZ3:DUQLQJVFDJRY
67$7(2)&$/,)251,$352326,7,21:$51,1*
:$51,1*