quick start

4 5
GETTING STARTED - 1ST TIME USE
ADD SALT TO WATER SOFTENER
$
Open
the lid
Add water to
dispenser
before
the first
wash only.
Add special
salt (never
use table salt
or detergent!)
The water softening system creates optimal washing results by dissolving lime-
scale and setting the correct water
hardness for the detergent to work
best.
Ask your water company what the
water hardness is or use the
included water test strip.
Set your dishwasher to the correct
setting.
To adjust the setting:
• Press the ON/OFF button.
• Hold down button A (see pages
6-7) and press Start until the display indicates H:0... is shown on the display
window.
• Release both buttons. The indicator of button A ashes and the display
indicates H:00.
• Press buttons B or C (up or down) to select the desired setting.
• Press Start to save the setting.
ADJUSTING THE WATER SOFTENING SYSTEM
Upper rack
Lower Rack
Load pots and pans and other large
items upside down.
Load plates and bowls in lower
rack leaning inward.
For small plates, glasses and cups.
Small cups t on cup shelf.
The cup shelf also serves as
stemware support.
3rd rack Cutlery basket
LOADING TIPS FOR OPTIMAL CLEANING
Scrape
o
food,
but
do not
rinse.
Use rinse
aid
for better
drying.
Adjust
upper rack
as needed
for large
items.
PUSH
USAGE TIPS FOR BEST RESULTS
Do not
place
objects in
detergent
tray or
block it with
dishes
WARNING
• Load sharp items (knives, skewers, etc.) pointing down. Failure to do so may
result in injury.
• To avoid risk of injury, always use caution when opening the door during or
following a wash cycle as hot water or steam may escape. Do not fully open the
door until water noises have stopped and steam has subsided.
!