quick start
8 9
ADD DETERGENT
Use detergent tabs, fresh powdered detergent or liquid detergent. For the Glass
cycle, use 1 -1.75 Tbsp. of detergent or use detergent tabs with glassware
protection.
Tip: dispenser lid should slide closed easily.
1.75 Tbsp. (25 ml)
3 Tbsp. max.
1 Tbsp. (15 ml)
TO CLOSE THE COVER
CLICK
DETERGENT AMOUNTSLAY TABS FLAT
START YOUR DISHWASHER
1. Press the On/O button.
2. Select a cycle and option if desired.
3. Press Start.
ADJUSTING THE SETTINGS
1. Press the On/O button. Hold down button A (see pages 6-7) and
press Start until the display shows H:0x or d:0x.
2. Release both buttons. The LED for the function key ashes and the
digital display shows the factory set value. Press A to choose the
setting.
3. Press buttons B or C (up or down) to change the setting.
4. Press Start button to save the setting.
FREQUENTLY ASKED QUESTIONS
Q: Why is food left on dishes?
A: It is possible the dishes do not have adequate clearance between them.
Also, be sure nothing is blocking spray arm and that the lter is clean. Select an
intensive cleaning cycle.
Q: Why does the cycle run a long time?
A: 1. Sensors in the dishwasher automatically increase the cycle time to ensure a
good wash when heavy soil is detected.
2. Incoming water may not be hot enough and dishwasher has to heat it.
Q: Why is E:XX (X can be any number) displayed?
A: This is an error code. For example E:22 indicates there is water in the sump
because the lter is blocked or needs cleaning. See the Use and Care Manual
for a list of error codes.
To access the full Use and Care Manual, go to:
www.bosch-home.com/us/service/get-support/owner-manuals.
MAINTENANCE TIPS
Clean surfaces with damp cloth and mild soap.
NOTICE: Do not use abrasives or bleach based cleaners. Do not use stainless
steel cleaner on black stainless or anti-nger print surfaces.
Clean the lter 3-12 times a year, depending on usage.
1. Unscrew the Large Object Trap as illustrated and remove the entire lter
system.
2. Remove the micro-lter from the ne lter, rinse the lters under running
water clean with a soft brush.
3. Reinstall the lter system in reverse sequence, align arrows.
1
2
ADD RINSE AID
This dishwasher is designed to be used
with rinse aid, which enhances drying
results and shine.
Tip: avoid air vent and remove lid for easier
pouring.
max
vent
air
Setting Factory setting Description
H-water hardness
H:00-H:07
H:04 Setting the water
hardness
r-Rinse Aid
r:00-r:06
r:05 Amount of rinse aid
aects drying
d-Intensive drying
d:00-d:01
d:00/ o Improved drying for
glasses and plastic
b-Beep at cycle end
b:00-b:03
b:02 Sound level when cycle
is complete
I-Info light
I:00-I:01
I:01 / on Light projected to signal
active wash cycle
P-Auto power o
P:00-P:02
P:01 / o after one
minute
Unit switches o after
cycle is complete, either
after 1 minute or 2 hours.