Data Sheet

© Bosch Connected Devices and GmbH 2016. All rights reserved, also regarding and disposal, exploitation, reproduction,
editing, distribution, as well as in the event of application for industrial property rights. March 3, 2016
Operating Conditions
 Indoor use
 Operating temperature range: -20 ºC ... 60 °C, (0 °C … 45 °C for battery charging)
 Storage temperature range: -20 ºC … 60 °C
 Humidity range: 10…90 %rH (non-condensing)
 IP Rating: IP 30 (IEC 60529)
 Supply Voltage: 5 V DC
 Charging Current: 500 mA Maximum
Measurement Ranges
 Accelerometer ±2 … ±16 g (programmable)
 Gyroscope ±125 º/s … ±2000 º/s (programmable)
 Magnetic field strength ±1300 µT (X,Y-Axis); ±2500µT (Z-Axis)
 Light sensor 0.045 lux … 188,000 lux ; 22-bit
 Temperature -20 ºC ... 60 °C [limited by XDK operating conditions]
 Pressure 300…1100 hPa
 Humidity 10…90 %rH (non-condensing) [limited by XDK operating conditions]
Sampling Rate
 Accelerometer BMA280 2000 Hz
 Gyroscope BMG160 2000 Hz
 Magnetometer BMM150 300 Hz
 Hum./Press./Temp. BME280 182 Hz
 Inertial Measurement Unit 1600 Hz (Accelerometer);
BMI160 3200 Hz (Gyroscope)
 Temperature ±2 K
 Humidity ±10 %rH
 Pressure ±10 hPa
Software
 Integrated development environment supplied with XDK Workbench (Eclipse)
 LWM2M communication protocol
 Extensive libraries and modular source code enable the developer to fully understand the system
User Interface
 Power switch
 Green system LED to display the state of charging
 3 programmable status LEDs (red, orange, yellow)
 2 programmable push-buttons
 Micro SD card slot
 Interface for J-Link Debug-probe
 Interface for extension board
For further information visit our website:
www.xdk.bosch-connectivity.com
Contact us
Bosch Connected Devices and Solutions GmbH
E-mail: [e-mail]