User manual

12 | English
F 016 L70 832 | (27.4.12) Bosch Power Tools
Technical Data
Noise/Vibration Information
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Hedgecutter AHS 45-26 AHS 50-26 AHS 55-26 AHS 60-26
Article number
3 600 ... H47 E.. H47 F.. H47 G.. H47 H..
Rated power input
W 550 600 600 600
Cutting length
mm 450 500 550 600
Tooth opening
mm 26 26 26 26
No-load stroke rate
min
-1
3 400 3400 3400 3400
Slipping Clutch Torque
Nm 50 50 50 50
Weight according to EPTA-Procedure
01/2003
kg 3.5 3.5 3.6 3.6
Protection class
/II /II /II /II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your garden product. The trade names of the individual garden products may vary.
Hedgecutter AHS 65-34 AHS 70-34
Article number
3 600 ... H47 J.. H47 K..
Rated power input
W700700
Cutting length
mm 650 700
Tooth opening
mm 34 34
No-load stroke rate
min
-1
3400 3400
Slipping Clutch Torque
Nm 50 50
Weight according to EPTA-Procedure 01/2003
kg 3.7 3.8
Protection class
/II /II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your garden product. The trade names of the individual garden products may vary.
Measured sound values determined according to EN 60745. 3 600 ... H47 E..
H47 F..
H47 G..
H47 H..
H47 J..
H47 K..
Typically the A-weighted noise levels of the product are:
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
dB(A)
dB(A)
dB
75
96
1
76
97
1
Vibration total values a
h
(triax vector sum) and uncertainty K determined according to
EN 60745:
a
h
K
m/s
2
m/s
2
2.5
1.5
4.0
1.5
OBJ_BUCH-1549-002.book Page 12 Friday, April 27, 2012 8:56 AM