User manual

4 | English
F 016 L70 927 | (19.10.12) Bosch Power Tools
Intended Use
This power unit is only suitable for Bosch Multi-tool attach-
ments and intended for private gardening.
Technical Data
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical data” is in conformity with the fol-
lowing standards or standardization documents: EN 60335
according to the provisions of the directives 2006/95/EC,
2004/108/EC, 2006/42/EC, 2000/14/EC.
Heavy Duty Trimmer Attachment
2000/14/EC: Guaranteed sound power level 96 dB(A).
Equipment category: 33
Pole Hedgecutter Attachment
2000/14/EC: Guaranteed sound power level 103 dB(A).
Equipment category: 25
Pole Pruner Attachment
2000/14/EC: Guaranteed sound power level 107 dB(A).
Equipment category: 25
Technical file (2006/42/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS,
Stowmarket, Suffolk IP14 1EY, England
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
21.05.2012
Noise/Vibration Information
The following information is applicable for the attachment op-
erated by the power unit.
Pole Pruner Attachment
Measured sound values determined according to EN ISO
11680.
Typically the A-weighted noise levels of the product are:
Sound pressure level 84.5 dB(A); sound power level
104.5 dB(A). Uncertainty K =2.5 dB.
Vibration total values (triax vector sum): Vibration emission
value a
h
= 4.5 m/s
2
, Uncertainty K= 1 dB.
Heavy Duty Trimmer Attachment
Measured sound values determined according to EN 60335,
EN 786.
Typically the A-weighted noise levels of the product are:
Sound pressure level > 85 dB(A); sound power level
94 dB(A). Uncertainty K =2 dB.
Vibration total values (triax vector sum): Vibration emission
value a
h
= 3.5 m/s
2
, Uncertainty K= 1 dB.
Pole Hedgecutter Attachment
Measured sound values determined according to
EN ISO 10517.
Typically the A-weighted noise levels of the product are:
Sound pressure level 80.5 dB(A); sound power level
110.5 dB(A). Uncertainty K =2.5 dB.
Vibration total values (triax vector sum): Vibration emission
value a
h
= 2.5 m/s
2
, Uncertainty K= 1 dB.
Mounting and Operation
 Do not connect the machine to the mains socket before
it is completely assembled.
 Do not rapidly switch off and on.
Reaction direction
Movement direction
Switching On
Switching Off
Prohibited action
Accessories/Spare Parts
Power Unit AMW 10
Article number
0 600 8A3 0..
Rated power
W1000
No-load speed
min
-1
11400
Adjustable handle

Extention pole
mm 700
Weight according to
EPTA-Procedure 01/2003
kg 4.2
Protection class
/II
Serial number
see type plate on the gar-
den product
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your garden prod-
uct. The trade names of the individual garden products may vary.
Symbol Meaning
Dr. Egbert Schneider
Senior Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Action Figure
Delivery Scope 1
Mounting the Auxiliary Handle 2
Fitting the multi-tool attachmentt 3
Connecting the Extension Lead 4
Attaching the Shoulder Strap 4
Attaching the Extension Pole 5
OBJ_BUCH-1818-001.book Page 4 Friday, October 19, 2012 11:21 AM