Instructions

32 | English
F 016 L81 767 | (29.11.17) Bosch Power Tools
After-sales Service and Application
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the garden product.
It is possible, that your product’s software version be re-
quired (see “Menu > Settings > System Options > Info”).
If the machine is requested to be sent to the service centre,
the Indego robotic lawnmower, power supply and docking
station must always be sent together.
If your machine has a personalised top cover it should be sent
in with the original top cover.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: [phone]
E-Mail: [e-mail]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: [phone]
Fax: [phone]
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: [phone]
Fax: [phone]
Inside New Zealand:
Phone: [phone]
Fax: [phone]
Outside AU and NZ:
Phone: [phone]
www.bosch-pt.com.au
www.bosch-pt.co.nz
Republic of South Africa
Customer service
Hotline: [phone]
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: [phone]
Fax: [phone]
E-Mail: [e-mail]
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: [phone]
Fax: [phone]
E-Mail: [e-mail]
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: [phone]
Fax: [phone]
E-Mail: [e-mail]
Machine leaves rag-
ged finish/poor quali-
ty of cut
Height of cut too low Increase height of cut
Mower requires more cuts to finish the garden Allow mower to run for 3 full cuts to cover whole lawn ar-
ea
Cutting blades blunt Reverse or replace blades (recommended every new
season)
Possible clogging Always turn isolator switch off first, then check under-
neath the mower and clear out as necessary (always
wear protective gloves)
No charging proce-
dure possible
Charging pins corroded Clean the charging pins
Perimeter wire not
detected
Wire terminal has become corroded Re-strip the wire for a proper connection
Height of cut button
stuck
Possible clogging Always turn isolator switch off first, then check under-
neath the mower and clear out as necessary (always
wear protective gloves)
Problem Possible Cause Corrective Action
OBJ_BUCH-3008-003.book Page 32 Wednesday, November 29, 2017 12:20 PM