Instructions

English | 11
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for stripping coats of paint, thaw-
ing water pipes, bending plastic, melting adhesive bonding,
killing weeds and heating shrink tubing.
The power tool is intended to be operated by hand, under
supervision.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Storage surface
(2)
On/off switch and power settings
(3)
Nozzle
(4) Heat shield, removable (UniversalHeat 600)
(5)
Surface nozzle
A)
(6)
Glass protection nozzle
A)
(7)
Angle nozzle
A)
(8)
Reflector nozzle
A)
(9)
Reducing nozzle
A)
(10)
Heat shrink plastic tube
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Hot air gun EasyHeat 500 UniversalHeat 600
Article number
3 603 BA6 0.. 3 603 BA6 1..
Rated power input W 1600 1800
Airflow l/min 240/450 200
A)
/350
A)
/500
A)
Temperature at the nozzle outlet
B)
°C 300/500 50
A)
/300
A)
/600
A)
Temperature measurement accuracy ±10% ±10%
Weight according to EPTA-Procedure 01:2014 kg 0.47 0.53
Protection class
/ /
A) The amount of air increases when the temperature rises from 50°C to 300 °C/600°C. The speed of the fan is identical at all power settings.
B) At an ambient temperature of approx. 20°C
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/vibration information
Typically, the A-weighted sound pressure level of the power
tool is less than 70dB(A).
Total vibration values a
h
(triax vector sum) and uncertainty
K: a
h
≤2.5m/s
2
, K=1.5m/s
2
.
Operation
Starting Operation
u Pay attention to the mains voltage. The voltage of the
power source must match the voltage specified on the
rating plate of the power tool.
Creation of Smoke During Initial Use
A coating protects the metal surfaces from corrosion ex-
works. This protective layer evaporates during initial use.
Switching On
Slide the on/off switch (2) upwards.
Switching Off
Slide the on/off switch(2) downwards into the0position.
u UniversalHeat 600: After working at high temperat-
ures for a prolonged period, let the power tool cool
down by briefly running it at the 50 °C power setting
before switching it off.
Selecting a power setting
You can choose between different power settings using the
on/off switch(2):
EasyHeat 500 UniversalHeat 600
Setting °C l/min Setting °C l/min
– – 50 200
300 240 300 350
500 450 600 500
Bosch Power Tools 1 609 92A 4RC | (09.01.2019)