User manual

16 | English
1 609 92A 3FK | (15.12.16) Bosch Power Tools
23 Rubber lip* (AdvancedVac 20)
24 Rubber lip/brush insert* (UniversalVac 15)
25 Hose connection piece (blower function)
26 Exhaust air cover
27 Snap-fastener
28 Connection flange
29 Dust bag*
30 Release buttons for rubber lip/brush insert
31 Air diffuser
32 Fabric filter
33 Filter
34 Filter holder
35 Filter basket
36 Permanent filter
37 Cable holder
38 Retaining strap
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60335-2-69:
a
h
< 2.5 m/s
2
, K= 1.5 m/s
2
.
Assembly
 Before any work on the vacuum cleaner itself, pull the
mains plug.
Mounting the Vacuum Hose
Vacuuming function (see figure A1)
– Insert the vacuum hose 16 into the hose connection piece
3 and turn it all the way in clockwise direction.
Blower Function (see figure A2)
The blower function is suitable for cleaning hard-to-reach are-
as or areas in which vacuuming is not possible, e.g. removing
leaves from gravel.
 The vacuum cleaner has a blower function. Do not blow
the outgoing air randomly in enclosed areas. Use the
blower function only with the a clean hose. Dusts can be
hazardous to one’s health.
– Switch on the vacuum cleaner for at least 5 seconds
(on/off switch 5/mode selector switch 5 set to the “Vacu-
uming” symbol) to clean the vacuum hose 16 of dust de-
posits.
–Turn the vacuum hose 16 all the way in anti-clockwise di-
rection and pull it out of the hose connection piece 3.
– Open the exhaust air cover 26.
– Insert the vacuum hose 16 into the hose connection piece
25 and turn it all the way in clockwise direction.
Wet/dry vacuum cleaner UniversalVac 15 AdvancedVac 20
Article number
0 603 3D1 1.. 0 603 3D1 2..
Rated power input
W 1000 1200
Frequency
Hz 50/60 50/60
Container volume (gross)
l15.020.0
Net volume (for fluids)
l8,513,5
Dust bag contents
l11.816.8
Vacuum (turbine), max.
mbar 240 260
Airflow (turbine), max.
l/s 65 70
Automatic Start/Stop feature
– 
Weight according to EPTA-Procedure 01:2014
kg 6.9 7.6
Protection class
/II /I
Degree of protection
IP X4 IP X4
The values given are valid for nominal voltages [U] of 230 V. For lower voltage and models for specific countries, these values can vary.
Automatic Start/Stop feature*
Rated voltage
max. power
output
min. power
output
EU/AUS
220–240 V 2000 W 100 W
UK
220–240 V 1800 W 100 W
* Specification of the allowable load of the connected power tool (coun-
try-specific)
UniversalVac 15 AdvancedVac 20
Sound emission values determined according to
EN 60335-2-69.
The A-rated sound
pressure level of the
vacuum cleaner is
typically as follows 77 dB(A) 78 dB(A)
Uncertainty K 3 dB 3 dB
The noise level when working can exceed 80 dB(A). Wear
hearing protection!
OBJ_BUCH-3012-002.book Page 16 Thursday, December 15, 2016 9:29 AM