User manual
English | 17
Bosch Power Tools 2 609 140 991 | (13.5.13)
Assembly
Inserting/Replacing the Batteries
Alkali-manganese batteries are recommended for the measuring tool.
To open the battery lid 4, press the latch 5 in the direction of the arrow
and remove the battery lid. Insert the batteries. When inserting, pay at-
tention to the correct polarity according to the representation on the in-
side of the battery compartment.
When the battery symbol appears for the first time on the display,
measurements are still possible for approx. 15 minutes. When the battery
symbol flashes, the batteries must be replaced; measurements are no
longer possible.
Replace all batteries at the same time. Only use same-brand batteries
with the identical battery capacity.
Batteries
2 x 1.5 V LR03 (AAA)
Battery service life in measuring operation, ap-
prox.
5h
Weight according to EPTA-Procedure
01/2003
0.1 kg
Dimensions
100x36x23mm
A) The working range increases depending on how well the laser light is reflected from
the surface of the target (scattered, not reflective) and with increasedbrightness of
the laser point to the ambient light intensity (interior spaces, twilight). In unfavourable
conditions, e.g., with extreme interior illumination or a badly reflecting surface, the
measuring range may be limited.
B) In unfavourable conditions, e. g., with extreme interior illumination, badly reflecting
surface or the room temperature deviating heavily from 25 °C, the maximum devia-
tion can be up to
±7 mm per 15 m. In favourable conditions, a deviation influence of
±0.05mm/m must be taken into account.
The measuring tool can be clearly identified with the serial number 6 on the type plate.
Digital Laser Rangefinder PLR15
OBJ_BUCH-1900-001.book Page 17 Monday, May 13, 2013 11:40 AM