User's Guide
Table Of Contents
- 1 Hints for This Document
- 2 Introduction
- 3 General information
- 4 Sets, accessories, mounting material and ordering information
- 5 Functions and configurations
- 6 Activation and coupling of the Connect S2
- 7 Mounting
- 8 Operation and maintenance
- 9 Support
- 10 Technical data
- 11 Handling and transport
- 12 Disposal
- 13 Certifications and regulatory Notes
- 14 Intended Use
- 15 Safety notes
- 16 Third-Party Licenses and Components
Connect S2
| Solar Frame | User Guide
© Robert Bosch Manufacturing Solutions GmbH
Bosch Connected Industry
26 |
39
AC power supply
Connection cable length up to 3 m length
Certifications RoHS, CE, FCC, ISED, EN50155 others on request
Variants
3843.AY0.457 Power supply 230 V (Euro connector)
3843.AY0.456 Power supply 110 V (US connector)
Output
24 V
⎓
(DC)
0 to 0.5 A
12 W
Input 90 to 264 VAC
Working temperature -20 °C to +60 °C
Working humidity 20% to 90% rH (non-condensing)
IP protection class IP22 indoor use only
Note
Observe the data on the nameplate or the installation instructions and the
manufacturer's data sheet.