User's Guide
Table Of Contents
- 1 Hints for This Document
- 2 Introduction
- 3 General information
- 4 Sets, accessories, mounting material and ordering information
- 5 Functions and configurations
- 6 Activation and coupling of the Connect S2
- 7 Mounting
- 8 Operation and maintenance
- 9 Support
- 10 Technical data
- 11 Handling and transport
- 12 Disposal
- 13 Certifications and regulatory Notes
- 14 Intended Use
- 15 Safety notes
- 16 Third-Party Licenses and Components
Connect S2
| Solar Frame | User Guide
© Robert Bosch Manufacturing Solutions GmbH
Bosch Connected Industry
7 |
39
3 General information
Before using the Connect S2 Gateway, please familiarize yourself with the Safety notes on page 34. It is important to
observe the safety instructions to ensure safe installation, operation and disposal.
Various accessories and mounting materials are available for the Connect S2 Gateway for many different applications. The
chapter Sets, accessories, mounting material and ordering information, page 8, provides an overview of all options.
The Connect S2 supports a variety of functions and configuration options. Bosch delivers pre-set Connect S2 to the
customer to make commissioning as easy and quick as possible. When ordering, the customer selects the desired
configuration of the Connect S2, see chapter Functions and configurations, page 12.
We recommend that the unit be switched on before installation. Follow the instructions for Activation and coupling of the
Connect S2 the Connect S2 on page 14.
There are various options for mounting the Connect S2 on a moving object or at a fixed location. Depending on the location
and the local conditions, different mountings are possible. Details are described in chapter Mounting on page 15.
The Connect S2 works self-sufficiently and largely maintenance-free. The instructions for Operation and maintenance, page
24, should be observed.
For questions and if help is required, there is a Support, page 24.
An overview of all technical data for the Connect S2 Gateway and the solar support (accessories) can be found in the
chapter Technical data, page 25.
For greater safety, the Connect S2 uses an integrated battery with lithium iron phosphate technology (LiFePO4). As this is
lithium technology, the current regulations for Handling and transport, page 28, must nevertheless be observed during
handling, transport and use.
At the end of use, the Connect S2 must be correctly disassembled and returned. All details are described in chapter
Disposal, page 31.
When using a Connect S2, the legal requirements of the respective countries of use must be observed and the intended
use must be observed, see chapters Certifications and regulatory Notes, page 32 and Intended Use, page 33.