User Manual

English | 21
Securing with the universal holder (accessory)
(seefigureN)
Using the universal holder(17), you can secure the measur-
ing tool on vertical surfaces, pipes or magnetizable materi-
als, for example. The universal holder is also suitable for use
as a building tripod and facilitates height adjustment of the
measuring tool.
Roughly align the universal holder(17) before switching on
the measuring tool.
Working with the Holder LB10 (accessory)
You can secure the measuring tool on vertical surfaces or
magnetisable materials using the holder(18). In conjunction
with the ceiling clip(16), the measuring tool can also be
aligned vertically.
Roughly align the holder(18) before switching on the meas-
uring tool.
Working with the Laser Receiver (accessory)
(seefigureN)
Use the laser receiver(19) to improve detection of the laser
lines in adverse lighting conditions (bright environment, dir-
ect sunlight) and over greater distances.
All operating modes are suitable for operation with the laser
receiver(19).
Laser Goggles (Accessory)
The laser goggles filter out ambient light. This makes the
light of the laser appear brighter to the eye.
u Do not use the laser goggles as protective goggles.
The laser goggles make the laser beam easier to see; they
do not protect you against laser radiation.
u Do not use the laser goggles as sunglasses or while
driving. The laser goggles do not provide full UV protec-
tion and impair your ability to see colours.
Example applications (see figuresI–N)
Examples of possible applications for the measuring tool can
be found on the graphics pages.
Maintenance and Service
Maintenance and Cleaning
Keep the measuring tool clean at all times.
Never immerse the measuring tool in water or other liquids.
Wipe off any dirt using a damp, soft cloth. Do not use any de-
tergents or solvents.
The areas around the outlet aperture of the laser in particular
should be cleaned on a regular basis. Make sure to check for
lint when doing this.
Only store and transport the measuring tool in the protective
pouch (24).
If the measuring tool needs to be repaired, send it off in the
protective pouch (24).
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: [phone]
Toll-Free: 1800 880188
Fax: [phone]
E-Mail: [e-mail]
www.bosch-pt.com.my
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: [phone]
E-Mail: [e-mail]
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
Measuring tools, accessories and packaging should be re-
cycled in an environmentally friendly manner.
Do not dispose of measuring tools or batteries
with household waste.
Only for EU countries:
According to the Directive 2012/19/EU on waste electrical
and electronic equipment and its transposition into national
law, measuring tools that are no longer usable, and, accord-
ing to the Directive 2006/66/EC, defective or drained bat-
teries must be collected separately and disposed of in an en-
vironmentally correct manner.
If disposed incorrectly, waste electrical and electronic
equipment may have harmful effects on the environment and
human health, due to the potential presence of hazardous
substances.
Only for United Kingdom:
According to Waste Electrical and Electronic Equipment Reg-
ulations 2013 (2013/3113) and the Waste Batteries and
Accumulators Regulations 2009 (2009/890), measuring
Bosch Power Tools 1 609 92A 7LT | (28.04.2022)