Datasheet

10 | English
(3)
Bluetooth® Low Energy Module cover
(4)
Blue connection status indicator
(5)
Red temperature monitoring/error indicator
(6)
Power Boost button
(7)
Green battery charge indicator
(8)
Wall mount
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Charger GAL 18 V-160 C
Article number
2 607 226 3..
Battery charging voltage (automatic voltage detection) V 14.4 - 18
Charge current A 16
Permitted charging temperature range
°
C 0 - 45
ProCORE18 V batteries: Charging time at battery capacity, ap-
prox.
approx. 50%
A)
/ approx. 80%
B)
/ approx. 80%
C)
/
battery charged
D)
– 4.0 Ah min 9 / 21 / 32 / 51
– 8.0 Ah min 15 / 26 / 32 / 51
– 12.0 Ah min 22 / 36 / 36/ 55
Standard batteries: Charging time at battery capacity, approx. approx. 80%
C)
/ battery charged
D)
– 4.0 Ah min 16 / 25
– 5.0 Ah min 20 / 35
– 6.0 Ah min 24 / 48
Number of battery cells 4–15
Weight according to EPTA-Procedure 01:2014 kg 0.95
Protection class
/ II
Data transmission
Bluetooth® Bluetooth
®
4.1 (Low Energy)
E)
Signal interval s 8
Max. signal range
F)
m 30
A) State of charge of the battery 50% (after charging with Power Boost). The battery can be removed for immediate use.
B) State of charge of the battery approx. 80% (after charging with Power Boost). The battery can be removed for immediate use.
C) State of charge of the battery approx. 80% (after charging with standard charging mode). The battery can be removed for immediate use.
D) State of charge of the battery 97– 100% (after charging with standard charging mode).
E) The mobile terminal devices must be compatible with Bluetooth® Low Energy devices (version 4.1) and support the Generic Access Profile
(GAP).
F) The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be signi-
ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).
Operation
Assembly
u Pull the plug out of the socket before carrying out any
work on the charger.
Inserting the

® Low Energy Module
Note: The Bluetooth ® Low Energy Module is available as an
accessory for the GAL 18V-160 C charger; it is included in
the scope of delivery for the GAL 18V-160 C Connected
charger.
Read the corresponding operating instructions for informa-
tion about the Bluetooth® Low Energy Module.
Wall mounting
The charger can be used either free-standing (for use on a
desktop) or mounted on the wall.
When affixing to the wall: Drill two holes, leaving a clearance
as specified in the image.
To secure it, use round-head screws with a diameter of 5 mm
to max. 6.5 mm.
1 609 92A 52F | (11.03.2019) Bosch Power Tools