User manual

14 | English
F 016 L81 183 | (28.4.16) Bosch Power Tools
Under misuse conditions or after
damage liquid can be ejected from
the product, avoid all contact with
the product. If contact with the liquid
occurs, seek medical advice.
Only use Bosch Professional Garden
Tool recommended and approved ac-
cessories.
Do not use in elevated areas.
In addition, observe the safety in-
structions for all product used in con-
junction with this product.
For installation please refer to nation-
al wiring rules.
Switch off and remove plugs from
mains inlet and outlet sockets before
adjusting or manoeuvring, cleaning or
if the cable is entangled and before
leaving the product unattended for
any period. Keep the supply cable
away from any cutting blades or
sharp objects.
Safety warnings for power supply
The supply cord must be inspected
for signs of damage at regular inter-
vals and may only be used if in perfect
condition.
If the cord is damaged, it must be re-
placed by the manufacturer, its ser-
vice agent or similarly qualified per-
sons in order to avoid a hazard.
Do not run over, crush or pull the ca-
bles.
Protect the cables from heat, oil and
sharp edges.
The power supply is double insulated
for safety and requires no earth
connection while in inverting mode.
The output voltage is 230 V AC,
50 Hz. Contact your Bosch Service
Centre for details. If in doubt contact
a qualified electrician or the nearest
Bosch Service Centre.
Products sold in GB only: Your prod-
uct is fitted with a BS 1363/A ap-
proved electric plug with internal fuse
(ASTA approved to BS 1362).
If the plug is not suitable for your
socket outlets, it should be cut off
and an appropriate plug fitted in its
place by an authorised customer ser-
vice agent. The replacement plug
should have the same fuse rating as
the original plug.
The severed plug must be disposed of
to avoid a possible shock hazard and
should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only:
Use a residual current device (RCD)
with a rated residual current of 30 mA
or less.
The UK adapter is only to be used in
horizontal orientation for valid IP pro-
tection.
Intended Use
This product is intended for Professional use up to 1500 W.
Product Features
The numbering of the components shown refers to the illus-
trations on the graphic pages.
1 Cooling fan
2 Input socket for AC mains
3 LCD display
4 On/off button
5 Outlet sockets (2x)
6 Overload reset button
7 Frame
8 UK adapter
The accessories illustrated or described are not included as stand-
ard delivery.
OBJ_BUCH-2703-003.book Page 14 Thursday, April 28, 2016 11:24 AM