Instructions

English | 19
Cordless rotary hammer GBH18V-26 GBH18V-26F
Recommended batteries GBA 18V...
ProCORE18V...
GBA 18V...
ProCORE18V...
Recommended chargers GAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
A) Depends on battery in use
B) Limited performance at temperatures <0°C
Noise/Vibration Information
GBH18V-26 GBH18V-26F
Noise emission values determined according to EN60745-2-6.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level dB(A)
91 91
Sound power level dB(A)
102 102
UncertaintyK dB
3 3
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K determined according to EN60745-2-6:
Hammer drilling into concrete:
a
h
m/s
2
13.0 12.5
K m/s
2
1.5 1.5
Chiselling:
a
h
m/s
2
8.5 9.0
K m/s
2
1.5 1.5
Drilling into metal:
a
h
m/s
2
2.5 2.5
K m/s
2
1.5 1.5
Screwdriving:
a
h
m/s
2
2.5 2.5
K m/s
2
1.5 1.5
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u Before any work on the tool (e.g. maintenance, tool
change etc.) as well as during transport and storage,
set the rotational direction switch to the middle posi-
tion. There is risk of injury from unintentionally pressing
the on/off switch.
Battery Charging
u Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
Bosch Power Tools 1 609 92A 5GC | (14.11.2019)