Instructions

English | 13
Intended Use
The power tool is intended for tightening and loosening
screws, as well as for drilling in wood, metal, ceramic and
plastic and for impact drilling in brick, masonry and stone.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Tool holder
(2)
Keyless chuck
(3)
Torque presetting ring
(4)
Operating mode presetting ring
(5)
Gear selector switch
(6)
Rotational direction switch
(7)
Battery release button
(8)
Battery
a)
(9)
Battery charge indicator
(10)
On/off switch
(11)
Worklight (LED)
(12)
Handle (insulated gripping surface)
(13)
Drill bit
a)
(14)
Universal bit holder
a)
(15)
Screwdriver bit
a)
a)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Combination Cordless Drill GSB12V-15
Article number
3601JB69..
Rated voltage V= 12
No-load speed
A)
– First gear min
-1
0–380
– Second gear min
-1
0–1300
Impact rate min
-1
0–19500
Max. torque, hard/soft
screwdriving application ac-
cording to ISO 5393
A)
Nm 30/15
Max. drilling diameter
– Masonry mm 10
– Steel mm 10
– Wood mm 19
Max. screw diameter mm 7
Chuck capacity mm 1–10
Weight according to
EPTA-Procedure 01:2014
B)
kg 1.1–1.3
Recommended ambient tem-
perature during charging
°C 0to+35
Combination Cordless Drill GSB12V-15
Permitted ambient temperat-
ure during operation and dur-
ing storage
°C –20to+50
Recommended rechargeable
batteries
GBA 12V...
Recommended chargers GAL 12...
GAX 18...
A)
Measured at 20−25°C with rechargeable batteryGBA 12V
1.3Ah.
B)
Measured withGBA 12V 2.0Ah andGBA 12V 6.0Ah.
Noise/vibration information
Noise emission values determined according to
EN62841-2-1.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 82dB(A); sound power level
93dB(A). Uncertainty K=3dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according toEN62841-2-1:
Drilling into metal: a
h
<2.5m/s
2
, K=1.5m/s
2
,
Impact drilling into concrete: a
h
=12.5m/s
2
, K=1.5m/s
2
.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
u Remove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Bosch Power Tools 1 609 92A 6NF | (12.08.2021)