operation manual

English | 19
Bosch Power Tools 1 609 92A 1CR | (2.11.15)
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise levels of the product are:
Sound pressure level 91 dB(A); Sound power level
102 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-3:
Surface grinding: a
h
=6.5m/s
2
, K=1.5 m/s
2
,
Disk sanding: a
h
=3.5m/s
2
, K=1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
Angle Grinder GWS... 700 700 710 710 750
Article number
0 601 ... 394 0.. 394 0.. 394 0.. 394 0.. 394 0..
Rated power input
W 700 700 710 750 750
Output power
W 355 355 355 380 380
Rated speed
min
-1
11000 11000 11000 11000 11000
Speed control adjustment
min
-1
– ––––
Grinding disc diameter, max.
mm 115 125 115 125 115
Thread of grinder spindle
M 14 M 14 M 14 M 14 M 14
Thread length (max.) of grinder spindle
mm 22 22 22 22 22
Kickback stop
– ––––
Restarting Protection
  – 
Reduced starting current
– ––––
Weight according to EPTA-Procedure
01:2014
– with vibration-damping auxiliary
handle
– with standard-auxiliary handle
kg
kg
1.9
1.8
1.9
1.8
1.9
1.8
1.9
1.8
1.9
1.8
Protection class
/II /II /II /II /II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Angle Grinder GWS... 750 750-100 750-100 I 750-125 750-125 750-125
Article number
0 601 ... 394 00. 394 0.. 394 2.. 394 0B. 394 04. 394 05.
Rated power input
W750750 750 750 750 750
Output power
W380380 380 380 380 380
Rated speed
min
-1
11000 11000 11000 11000 11000 11000
Speed control adjustment
min
-1
– –––––
Grinding disc diameter, max.
mm 125 100 100 125 125 125
Thread of grinder spindle
M 14 M 10 M 10 M 10 M 14 M 10
Thread length (max.) of grinder spindle
mm 22 22 22 22 22 22
Kickback stop
– –  –––
Restarting Protection
 –  –––
Reduced starting current
– –  –––
Weight according to EPTA-Procedure
01:2014
– with vibration-damping auxiliary
handle
– with standard-auxiliary handle
kg
kg
1.9
1.8
1.9
1.8
1.9
1.8
1.9
1.8
1.9
1.8
1.9
1.8
Protection class
/II /II /II /II /II /II
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
OBJ_BUCH-2565-001.book Page 19 Monday, November 2, 2015 2:38 PM