Manualshelf

User Manual

ManualsBrandsBosch Security Systems ManualsElectronicsHigh Power Wireless 802.11b Access Point
18192021222324252627
22
Administration
In the Admin Settings (Security) page shown below, you may set the User Name and
Password for this web interface. Make sure that you write down this information and store in a
safe place so that it is not forgotten or stolen. Any time that you wish to reset the AP to factory
defaults, click on the Reset Configuration button on the Reboot & Reset page. The Admin
Settings page also allows you to either Allow Upgrade Uploads or Not Allow. For normal
operation, leave this off. The Web Server Port may also be changed if required.
User Name: ______________________
Password: ________________________
In the Reboot & Reset page shown below, you may use the Reboot button to immediately
reboot the AP. The Reset Configuration button will reset all configuration options to their
factory default values.