User's Manual Part 1
Table Of Contents
- Important Safeguards
- Disclaimers
- About this manual
- Table of Contents
- Section 1 - System Design and Planning
- 1 Wireless network design
- 2 DCN design
- 3 Optical network design
- 4 Camera control
- 5 Infra-red wireless language distribution
- 6 CobraNet
- 7 User set-up
Bosch Security Systems | 2007-02 | 9922 141 70691 en
DCN Wireless | Installation and User Instructions | System Design and Planning en | 27
3.7.5 Tap-offs
The network splitter (LBB4410/00) lets you make
tap-offs (refer to figure 3.8 for an example). Tap-offs
cannot be redundant. If the cable between the network
splitter and the digital audio expander (PRS-4DEX4)
becomes defective, the digital audio expander has no
connection to the central control unit.
figure 3.8: Redundant optical network with tap-off
DCN-WCCU
DCN- WAP
PRS-4 DEX4
INT-TX
LBB44 10/00