Cut Sheet

Intrusion Systems | ISN-C60 Slim Terminal Connection Contacts
The contacts are available in brown or white. Both models
have a slim design with breakaway mounting holes for tight-
fitting applications. The terminal connection eliminates the
need for 15.24 cm or 25.4 cm (6 in. or 10 in.) leads.
Certifications and Approvals
UL and X
Installation/Configuration Notes
Compatibility Information
All contact models are compatible with control panel
models that accept contact inputs.
Parts Included
Quantity Per Package Component
10 Assemblies (contacts, screws, super adhesive,
mounting holes, and tape covers)
10 Magnets
Technical Specifications
Specifications for All Models
Gap Width: 19 mm (0.75 in.)
Contact Dimensions: 6.35 mm x 9.5 mm x 50.8 mm
(0.25 in. x 0.375 in. x 2 in.)
Switch Configuration Type: Single pole single throw (SPST)
Maximum Contact Resistance: 150 μΩ (micro-ohm)
Minimum Breakdown Voltage: 250 VDC
Insulation Resistance: 10
10
Ω
Electrostatic Cap: 0.3 PF
Contact Capacity: 10 VAC
Maximum Conductive Current: 1.0 A
Maximum Voltage: 100 V
Operating Temperature Range: 7.2°C to -95.56°C (-45°F to -140°F)
Package Information
ATTENTION! Each package contains ten assemblies with contacts, screws,
super adhesive, mounting holes, tape covers, and ten magnets.
ISN-C60 Slim Terminal Connection
Contacts
▶
Closed loop
▶
Install with screws or with super adhesive
▶
Breakaway mounting holes for a tight fit
▶
Slim terminal connection design
▶
Includes deactivated rhodium reed switch
▶
Includes screws, super adhesive, mounting holes, and
tape cover
www.boschsecurity.com