Bosch Greenstar Owner's Manual
Table Of Contents
- Contents
- 1 Key to symbols and safety instructions
- 1.1 Key to symbols
- 1.2 Safety instructions
- 2 Information about the appliance
- 3 Preparing the appliance for operation
- 4 Operation
- 4.1 Overview of controls
- 4.2 Switching the appliance ON/OFF
- 4.3 Turning the space heating ON
- 4.4 Programming the heating control unit
- 4.5 ZBR..-3A appliances with DHW tank: Setting the DHW temperature
- 4.6 ZWB..-3A appliances (combi boilers): Setting the DHW temperature
- 4.7 Setting manual summer mode
- 4.8 Setting frost protection
- 4.9 Activating the key pad lock
- 4.10 Display codes
- 5 Thermal disinfection
- 6 Energy saving tips
- 7 Troubleshooting
- 8 Maintenance
- 9 Environmental responsibility/disposal
- 10 Quick reference
- Index
16 | Operation
6 720 806 993 (2013/03)Greenstar
4.4 Programming the heating control unit
Fig. 6
4.5 ZBR..-3A appliances with DHW tank:
Setting the DHW temperature
Observe the operating instructions for the heating control unit
included in the scope of delivery. There you can read:
▶ How to set the operating mode and the heating curve for outdoor
reset controls
▶ How to adjust the room temperature
▶ How to heat economically and save energy
DANGER: Danger of scalding!
▶ In normal operation, it is recommended to limit the DHW
temperature to 122 °F (50 °C) to limit the risk of scalding.
▶ Only set temperatures up to 158 °F (70 °C) for thermal
disinfection ( page 22).
9
12
h
15
18
21
24
h
3
6
6 720 612 660-07.2O