Bosch Greenstar Owner's Manual
Table Of Contents
- Contents
- 1 Key to symbols and safety instructions
- 1.1 Key to symbols
- 1.2 Safety instructions
- 2 Information about the appliance
- 3 Preparing the appliance for operation
- 4 Operation
- 4.1 Overview of controls
- 4.2 Switching the appliance ON/OFF
- 4.3 Turning the space heating ON
- 4.4 Programming the heating control unit
- 4.5 ZBR..-3A appliances with DHW tank: Setting the DHW temperature
- 4.6 ZWB..-3A appliances (combi boilers): Setting the DHW temperature
- 4.7 Setting manual summer mode
- 4.8 Setting frost protection
- 4.9 Activating the key pad lock
- 4.10 Display codes
- 5 Thermal disinfection
- 6 Energy saving tips
- 7 Troubleshooting
- 8 Maintenance
- 9 Environmental responsibility/disposal
- 10 Quick reference
- Index
Preparing the appliance for operation | 9
6 720 806 993 (2013/03)
Greenstar
3.1 Checking the boiler water pressure
The standard boiler water pressure is 14.5 - 21.75 psi (1 - 1.5 bar).
Should a higher boiler water pressure be required, refer to a trained and certified
heating contractor.
Fig. 1
3.2 Topping up the heating system water
Topping up the heating system water is different on every system. Therefore, you
should ask a trained and certified heating contractor to show you how it is done.
Maximum pressure of 30 psi (2.07 bar) at maximum heating water temperature
must not be exceeded (safety valve will spill).
6 720 641 934-04.2O
1
0
2
3
4
bar
psi
15
30
45