Bosch Greenstar Owner's Manual
Table Of Contents
- Contents
- 1 Key to symbols and safety instructions
- 1.1 Key to symbols
- 1.2 Safety instructions
- 2 Information about the appliance
- 3 Preparing the appliance for operation
- 4 Operation
- 4.1 Overview of controls
- 4.2 Switching the appliance ON/OFF
- 4.3 Turning the space heating ON
- 4.4 Programming the heating control unit
- 4.5 ZBR..-3A appliances with DHW tank: Setting the DHW temperature
- 4.6 ZWB..-3A appliances (combi boilers): Setting the DHW temperature
- 4.7 Setting manual summer mode
- 4.8 Setting frost protection
- 4.9 Activating the key pad lock
- 4.10 Display codes
- 5 Thermal disinfection
- 6 Energy saving tips
- 7 Troubleshooting
- 8 Maintenance
- 9 Environmental responsibility/disposal
- 10 Quick reference
- Index
10 | Operation
6 720 806 993 (2013/03)Greenstar
4 Operation
These operating instructions apply only to the boiler.
Depending on the heating control unit used, some functions may vary.
The following options for controlling the heating system are available:
• Outdoor reset control unit ( page 16, Fig. 6) installed in the boiler ( page 12,
[19])
• Outdoor reset control unit mounted on the wall
• Room thermostat
• Outdoor reset with room influence (room thermostat)
• Third party system control unit
Therefore, please read the operating instructions for the heating
control unit used.