User Manual

14 | English
u Only use the battery with products from the manufac-
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
u Always wait until the power tool has come to a com-
plete stop before placing it down.
u Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for dry sanding of wood, plastic,
filler and coated surfaces.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
On/off switch
(2)
Complete dust bag
(3)
Battery release button
A)
(4)
Rechargeable battery
A)
(5)
Rechargeable battery charge indicator
A)
(6)
Button for rechargeable battery charge indicator
A)
(7)
Orbital stroke rate preselection thumbwheel
(8)
Sanding pad
(9)
Handle (insulated gripping surface)
(10)
Sanding sheet
(11)
Screws for sanding pad
(12)
Sanding pad holder
(13)
Extraction outlet
(14)
Dust bag
(15)
Adapter for dust bag
(16)
Extraction hose
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Random orbit sander GEX 18V-125
Article number
3601C722..
Rated voltage V 18
Orbital stroke rate preselec-
tion
●
No-load speed n
0
A)
min
-1
6000–10,000
No-load orbital stroke rate
A)
min
-1
12,000–20,000
Orbit diameter mm 2.5
Sanding pad diameter mm 125
Weight according to EPTA-
Procedure 01:2014
A)
kg 1.5–2.5
Recommended ambient tem-
perature during charging
°C 0to+35
Permitted ambient temperat-
ure during operation
B)
and
during storage
°C –15to+50
Recommended rechargeable
batteries
GBA 18V...
ProCORE18V...
Recommended battery char-
gers
GAL 18...
GAX 18...
GAL 36...
A) Depends on battery in use
B) Limited performance at temperatures <0°C
Noise/Vibration Information
Noise emission values determined according
toEN62841-2-4.
Typically, the A-weighted sound pressure level of the power
tool is less than 70dB(A). The noise level when working can
exceed the volume stated. Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN62841-2-4:
a
h
<2.0m/s
2
, K=1.5m/s
2
,
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
1 609 92A 5MG | (10.11.2020) Bosch Power Tools