User Manual

English | 13
Bosch Power Tools 1 609 92A 14Z | (12.1.15)
Mounting and Operation
The following table indicates the action objectives for mounting and operation of the power tool. The instructions for each action
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
Action Figure Please observe Page
Removing the battery 1 204
Inserting the battery 2 204
Mounting application tools 3 204
Reversing the rotational direction 4 205
Setting the torque 5 205
Setting the torque (only when using GWA FC2
angle drill head)
6 206
Selecting the drilling position 7 206
Mounting the keyless chuck (GFA FC2) or off-set
angle adapter (GEA FC2) or angle drill head
(GWA FC2)
8 207
Mounting the application tool in the keyless
chuck (GFA FC2), off-set angle adapter
(GEA FC2) or angle drill head (GWA FC2)
9 207
Changing the position of engagement
(GEA FC2)
10 208
Changing the position of engagement
(GWA FC2)
11 208
OBJ_BUCH-2041-002.book Page 13 Monday, January 12, 2015 10:35 AM