User Manual

22 | English
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
u In case of damage and improper use of the battery, va-
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
u Only use the battery with products from the manufac-
turer. This is the only way in which you can protect the
battery against dangerous overload.
u The battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
u Caution! When using the power tool with Bluetooth
®
, a
fault may occur in other devices and systems, aero-
planes and medical devices (e.g. pacemakers, hearing
aids). Also, damage to people and animals in the im-
mediate vicinity cannot be completely excluded. Do
not use the power tool with Bluetooth
®
in the vicinity of
medical devices, petrol stations, chemical plants,
areas with a potentially explosive atmosphere or in
blasting areas. Do not use the power tool with
Bluetooth
®
in aircraft. Avoid using the product near
your body for extended periods.
The Bluetooth
®
word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cense.
Product Description and
Specifications
Read all the safety and
general instructions. Fail-
ure to observe the safety
and general instructions
may result in electric shock,
fire and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting, roughing and brush-
ing metal and stone materials, as well as making holes in
stone materials using diamond core cutters, without the use
of water.
A special protective guard for cutting must be used when
cutting bonded abrasives.
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
With the Bluetooth
®
Low Energy Module GCY42 inserted,
power tool data and settings can be transferred between the
power tool and a mobile device by means of Bluetooth
®
wire-
less technology.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Unlocking lever for protective guard
(2)
Direction of rotation arrow on housing
(3)
Lever
(4)
User interface (GWX 18V-15 SC)
(5)
On/off switch
(6)
Bluetooth
®
Low Energy Module GCY 42
(7)
Battery
A)
(8)
Battery release button
A)
(9)
Side handle (insulated gripping surface)
(10)
Protective guard for grinding
(11)
X-LOCK grinding disc/flap disc
A)
(12)
Protective guard for cutting
A)
(13)
X-LOCK cutting disc
A)
(14)
Handle (insulated gripping surface)
(15)
X-LOCK holder
(16)
Hand guard
A)
(17)
X-LOCK backing pad for fibre discs
A)
(18)
X-LOCK fibre disc
A)
(19)
X-LOCK clip for fibre discs
A)
(20)
X-LOCK cup brush/disc brush
A)
(21)
X-LOCK diamond core cutter
A)
(22)
Extraction guard for cutting with a guide block
A)
(23)
X-LOCK diamond cutting disc
A)
(24)
Battery charge indicator (user interface)
(25)
Kickback stop indicator (User Interface)
(26)
Speed preselection button (user interface)
(27)
Speed level/mode indicator (user interface)
(28)
Smartphone indicator (user interface)
(29)
Power tool status indicator (user interface)
(30)
Temperature indicator (user interface)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Angle grinder GWX 18V-15 C GWX 18V-15 SC
Article number
3601JH64.. 3601JH65..
1 609 92A 5RL | (19.06.2020) Bosch Power Tools