User Manual

English | 23
Angle grinder GWX 18V-15 C GWX 18V-15 SC
Rated voltage V= 18 18
Rated speed
A)
min
-1
11,000 11,000
No-load speed
B)
min
-1
9800 3400–9800
Max. grinding disc diameter mm 125 125
Kickback stop ● ●
Restart protection ● ●
Run-out brake ● ●
Speed preselection – ●
Weight according to EPTA-Procedure 01:2014
C)
– with low-vibration auxiliary handle kg 2.6–3.6 2.6–3.6
– with standard auxiliary handle kg 2.4–3.4 2.5–3.5
Recommended ambient temperature during charging °C 0to+35 0to+35
Permitted ambient temperature during operation
D)
and
during storage
°C –20to+50 –20to+50
Compatible rechargeable batteries GBA 18V...
ProCORE18V...
GBA 18V...
ProCORE18V...
Recommended rechargeable batteries for maximum
performance
ProCORE18V... ≥5.5Ah ProCORE18V... ≥5.5Ah
Recommended chargers GAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
Data transfer
Bluetooth
®
Bluetooth
®
4.2
(Low Energy)
E)
Bluetooth
®
4.2
(Low Energy)
E)
Signal interval s 8 8
Max. signal range
F)
m 30 30
A) Rated speed in accordance with EN 60745-2-3
B) Measured at 20–25°C with rechargeable battery ProCORE18V8.0Ah and depending on the battery's state of charge as well as the tool's
operating temperature
C) Depends on battery in use
D) Limited performance at temperatures <0°C
E) The mobile terminal devices must be compatible with Bluetooth
®
Low Energy devices (version 4.2) and support the Generic Access Profile
(GAP).
F) The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be signi-
ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).
Noise/Vibration Information
Noise emission values determined according to
EN60745-2-3.
Typically the A-weighted noise level of the power tool are: 90
dB(A); sound power level 101 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN60745-2-3:
Surface grinding (roughing):
a
h
=6.0m/s
2
, K=1.5m/s
2
,
Disc sanding:
a
h
=2.5m/s
2
, K=1.5m/s
2
.
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
Bosch Power Tools 1 609 92A 5RL | (19.06.2020)