User Manual
Table Of Contents
- Titelseite
- PSB 18 LI-2 Ergonomic
- Sicherheitshinweise
- Produkt- und Leistungsbeschreibung
- Montage
- Betrieb
- Inbetriebnahme
- Akku einsetzen
- Drehrichtung einstellen (siehe Bild B)
- Drehmoment vorwählen
- Betriebsart einstellen (siehe Bild C)
- Mechanische Gangwahl
- Ein-/Ausschalten
- Drehzahl/Schlagzahl einstellen
- Schnellabschaltung (KickBack Control)
- Vollautomatische Spindelarretierung (Auto-Lock)
- Auslaufbremse
- Temperaturabhängiger Überlastschutz
- Arbeitshinweise
- Inbetriebnahme
- Wartung und Service
- PSB 18 LI-2 Ergonomic
- Safety Instructions
- Product Description and Specifications
- Assembly
- Operation
- Starting Operation
- Inserting the battery
- Setting the rotational direction (see figure B)
- Preselecting the Torque
- Setting the operating mode (see figure C)
- Mechanical gear selection
- Switching on/off
- Adjusting the Speed/Impact Rate
- Emergency switch-off (KickBack Control)
- Fully automatic spindle lock (Auto-Lock)
- Run-out brake
- Temperature-dependent overload protection
- Practical advice
- Starting Operation
- Maintenance and Service
- PSB 18 LI-2 Ergonomic
- Consignes de sécurité
- Description des prestations et du produit
- Montage
- Mise en marche
- Mise en marche
- Montage de l’accu
- Sélection du sens de rotation (voir figure B)
- Présélection du couple
- Sélection d’un mode de fonctionnement (voir figure C)
- Sélection mécanique de la vitesse
- Mise en marche/arrêt
- Réglage de la vitesse de rotation/de la fréquence de frappe
- Arrêt rapide (KickBack Control)
- Blocage automatique de la broche (Auto-Lock)
- Frein d’arrêt immédiat
- Protection contre les surcharges en cas de surchauffe
- Instructions d’utilisation
- Mise en marche
- Entretien et Service après‑vente
- PSB 18 LI-2 Ergonomic
- Indicaciones de seguridad
- Descripción del producto y servicio
- Montaje
- Operación
- Puesta en marcha
- Montaje del acumulador
- Ajustar el sentido de giro (ver figura B)
- Preselección del par de giro
- Ajuste del modo de operación (ver figura C)
- Selector de velocidad mecánico
- Conexión/desconexión
- Ajuste de las revoluciones/frecuencia de percusión
- Desconexión rápida (KickBack Control)
- Retención automática del husillo (Auto-Lock)
- Freno de marcha por inercia
- Protección contra sobrecarga térmica
- Instrucciones de trabajo
- Puesta en marcha
- Mantenimiento y servicio
- PSB 18 LI-2 Ergonomic
- Instruções de segurança
- Descrição do produto e do serviço
- Montagem
- Funcionamento
- Colocação em funcionamento
- Colocar a bateria
- Ajustar o sentido de rotação (ver figura B)
- Pré-selecionar o binário
- Ajustar o modo de operação (ver figura C)
- Regulação mecânica da velocidade
- Ligar/desligar
- Ajustar o número de rotações/impactos
- Desligamento rápido (KickBack Control)
- Bloqueio automático do veio (Auto-Lock)
- Travão de funcionamento por inércia
- Indicador da proteção contra sobrecarga
- Instruções de trabalho
- Colocação em funcionamento
- Manutenção e assistência técnica
- PSB 18 LI-2 Ergonomic
- Avvertenze di sicurezza
- Descrizione del prodotto e dei servizi forniti
- Montaggio
- Uso
- Messa in funzione
- Inserimento della batteria
- Impostazione del senso di rotazione (vedere Fig. B)
- Preselezione della coppia
- Impostazione della modalità (vedere Fig. C)
- Selezione meccanica di velocità
- Accensione/spegnimento
- Regolazione del numero di giri/numero di colpi
- Disinserimento rapido (KickBack Control)
- Blocco automatico del mandrino (Auto-Lock)
- Freno di arresto graduale
- Protezione termosensibile contro sovraccarichi
- Indicazioni operative
- Messa in funzione
- Manutenzione ed assistenza
- PSB 18 LI-2 Ergonomic
- Veiligheidsaanwijzingen
- Beschrijving van product en werking
- Montage
- Gebruik
- Ingebruikname
- Accu plaatsen
- Draairichting instellen (zie afbeelding B)
- Draaimoment vooraf instellen
- Modus instellen (zie afbeelding C)
- Mechanische toerentalkeuze
- In- en uitschakelen
- Toerental of aantal slagen instellen
- Sneluitschakeling (KickBack Control)
- Volautomatische blokkering van de uitgaande as (Auto-Lock)
- Snelstop
- Temperatuurafhankelijke beveiliging tegen overbelasting
- Aanwijzingen voor werkzaamheden
- Ingebruikname
- Onderhoud en service
- PSB 18 LI-2 Ergonomic
- Sikkerhedsinstrukser
- Produkt- og ydelsesbeskrivelse
- Montering
- Brug
- Ibrugtagning
- Isætning af akku
- Indstilling af rotationsretning (se billede B)
- Forvalg af drejningsmoment
- Indstilling af driftstype (se billede C)
- Mekanisk gearvalg
- Tænd/sluk
- Indstilling af omdrejningstal/slagtal
- Hurtigfrakobling (KickBack Control)
- Fuldautomatisk spindellås (Auto-Lock)
- Udløbsbremse
- Temperaturafhængig overbelastningsbeskyttelse
- Arbejdsvejledning
- Ibrugtagning
- Vedligeholdelse og service
- PSB 18 LI-2 Ergonomic
- PSB 18 LI-2 Ergonomic
- Sikkerhetsanvisninger
- Produktbeskrivelse og ytelsesspesifikasjoner
- Montering
- Bruk
- Igangsetting
- Innsetting av batteriet
- Stille inn dreieretningen (se bilde B)
- Forhåndsinnstilling av dreiemoment
- Stille inn driftsmåte (se bilde C)
- Mekanisk girvalg
- Inn-/utkobling
- Innstilling av turtallet/slagtallet
- Hurtigutkobling (KickBack Control)
- Helautomatisk spindellås (Auto-Lock)
- Utløpsbrems
- Temperaturavhengig overbelastningsvern
- Informasjon om bruk
- Igangsetting
- Service og vedlikehold
- PSB 18 LI-2 Ergonomic
- Turvallisuusohjeet
- Tuotteen ja ominaisuuksien kuvaus
- Asennus
- Käyttö
- Käyttöönotto
- Akun asennus
- Kiertosuunnan valinta (katso kuva B)
- Vääntömomentin asetus
- Käyttötavan valinta (katso kuva C)
- Mekaaninen vaihteenvalinta
- Käynnistys ja pysäytys
- Kierrosluvun/iskuluvun säätö
- Toiminnan pikakatkaisu (KickBack Control)
- Täysautomaattinen karalukitus (Auto-Lock)
- Pysäytysjarru
- Lämpötilasta riippuva ylikuormitussuoja
- Työskentelyohjeita
- Käyttöönotto
- Hoito ja huolto
- PSB 18 LI-2 Ergonomic
- Υποδείξεις ασφαλείας
- Περιγραφή προϊόντος και ισχύος
- Συναρμολόγηση
- Λειτουργία
- Εκκίνηση
- Τοποθέτηση της μπαταρίας
- Ρύθμιση της φοράς περιστροφής (βλέπε εικόνα B)
- Προεπιλογή ροπής στρέψης
- Ρύθμιση του τρόπου λειτουργίας (βλέπε εικόνα C)
- Μηχανική επιλογή ταχύτητας
- Ενεργοποίηση/απενεργοποίηση
- Ρύθμιση αριθμού στροφών/κρούσεων
- Γρήγορη απενεργοποίηση (KickBack Control)
- Πλήρως αυτόματο κλείδωμα του άξονα (Auto‑Lock)
- Άμεσο φρένο
- Προστασία από υπερφόρτωση σε εξάρτηση από τη θερμοκρασία
- Υποδείξεις εργασίας
- Εκκίνηση
- Συντήρηση και σέρβις
- PSB 18 LI-2 Ergonomic
- Güvenlik talimatı
- Ürün ve performans açıklaması
- Montaj
- İşletim
- Çalıştırma
- Akünün yerleştirilmesi
- Dönme yönünün ayarlanması (Bakınız: Resim B)
- Tork ön seçimi
- İşletme türünün ayarlanması (Bakınız: Resim C)
- Mekanik vites seçimi
- Açma/kapama
- Devir sayısı/darbe sayısının ayarlanması
- Hızlı kapatma sistemi (KickBack Control)
- Tam otomatik mil kilidi (Auto-Lock)
- Boşta çalışma freni
- Sıcaklığa bağlı aşırı zorlanma emniyeti
- Çalışırken dikkat edilecek hususlar
- Çalıştırma
- Bakım ve servis
- PSB 18 LI-2 Ergonomic
- Wskazówki bezpieczeństwa
- Opis urządzenia i jego zastosowania
- Montaż
- Praca
- Uruchamianie
- Wkładanie akumulatora
- Ustawianie kierunku obrotów (zob. rys. B)
- Wybór momentu obrotowego
- Ustawianie trybu pracy (zob. rys. C)
- Mechaniczne przełączanie biegów
- Włączanie/wyłączanie
- Nastawianie prędkości obrotowej/liczby udarów
- System szybkiego wyłączania (funkcja KickBack Control)
- Automatyczna blokada wrzeciona (Auto‑Lock)
- Hamulec wybiegowy
- Termiczny wyłącznik przeciążeniowy
- Wskazówki dotyczące pracy
- Uruchamianie
- Konserwacja i serwis
- PSB 18 LI-2 Ergonomic
- Bezpečnostní upozornění
- Popis výrobku a výkonu
- Montáž
- Provoz
- Uvedení do provozu
- Nasazení akumulátoru
- Nastavení směru otáčení (viz obrázek B)
- Předvolba krouticího momentu
- Nastavení druhu provozu (viz obrázek C)
- Mechanická volba stupně
- Zapnutí a vypnutí
- Nastavení otáček/příklepů
- Rychlé vypnutí (KickBack Control)
- Plně automatická aretace vřetena (Auto-Lock)
- Doběhová brzda
- Ochrana proti přetížení závislá na teplotě
- Pracovní pokyny
- Uvedení do provozu
- Údržba a servis
- PSB 18 LI-2 Ergonomic
- Bezpečnostné upozornenia
- Opis výrobku a výkonu
- Montáž
- Prevádzka
- Uvedenie do prevádzky
- Vloženie akumulátora
- Smer otáčania (pozri obrázok B)
- Predvoľba krútiaceho momentu
- Nastavenie pracovného režimu (pozri obrázok C)
- Mechanické prepínanie rýchlostných stupňov
- Zapínanie/vypínanie
- Nastavenie počtu otáčok/frekvencie príklepu
- Rýchle vypnutie (KickBack Control)
- Plnoautomatická aretácia vretena (Auto-Lock)
- Dobehová brzda
- Tepelne závislá poistka proti preťaženiu
- Upozornenia týkajúce sa práce
- Uvedenie do prevádzky
- Údržba a servis
- PSB 18 LI-2 Ergonomic
- Biztonsági tájékoztató
- A termék és a teljesítmény leírása
- Összeszerelés
- Üzemeltetés
- Üzembe helyezés
- Az akkumulátor beszerelése
- A forgásirány beállítása (lásd a B ábrát)
- A forgatónyomaték előválasztása
- Az üzemmód beállítása (lásd a C ábrát)
- Mechanikus sebességfokozat beállítás
- Be- és kikapcsolás
- A fordulatszám/ütésszám beállítása
- Gyors lekapcsolás (KickBack Control)
- Teljesen automatikus tengelyreteszelés (Auto-Lock)
- Kifutás-fék
- Hőmérsékletfüggő túlterhelés elleni védelem
- Munkavégzési tanácsok
- Üzembe helyezés
- Karbantartás és szerviz
- PSB 18 LI-2 Ergonomic
- Toлько для стран Евразийского экономического союза (Таможенного союза)
- Указания по технике безопасности
- Описание продукта и услуг
- Сборка
- Работа с инструментом
- Включение электроинструмента
- Установка аккумулятора
- Настройка направления вращения (см. рис. B)
- Установка крутящего момента
- Установка режима работы (см. рис. C)
- Механический выбор передачи
- Включение/выключение
- Установка числа оборотов и ударов
- Функция быстрого отключения (KickBack Control)
- Автоматическое фиксирование шпинделя (Auto-Lock)
- Тормоз выбега
- Термическая защита от перегрузки
- Указания по применению
- Включение электроинструмента
- Техобслуживание и сервис
- PSB 18 LI-2 Ergonomic
- Вказівки з техніки безпеки
- Опис продукту і послуг
- Монтаж
- Робота
- Початок роботи
- Встановлення акумуляторної батареї
- Встановлення напрямку обертання (див. мал. B)
- Встановлення обертального моменту
- Встановлення режиму роботи (див. мал. C)
- Механічне перемикання швидкості
- Вмикання/вимикання
- Встановлення кількості обертів/кількості ударів
- Функція швидкого вимкнення (KickBack Control)
- Автоматична фіксація шпинделя (Auto-Lock)
- Гальмо інерційного вибігу
- Термічний захист від перевантаження
- Вказівки щодо роботи
- Початок роботи
- Технічне обслуговування і сервіс
- PSB 18 LI-2 Ergonomic
- Еуразия экономикалық одағына (Кеден одағына) мүше мемлекеттер аумағында қолданылады
- Қауіпсіздік нұсқаулары
- Өнім және қуат сипаттамасы
- Жинау
- Пайдалану
- Пайдалануға ендіру
- Аккумуляторды орнату
- Бұрау бағытын реттеу (B суретін қараңыз)
- Айналдыру моментін орнату
- Жұмыс түрін реттеу (C суретін қараңыз)
- Берілістің механикалық таңдалуы
- Қосу/өшіру
- Айналымдар/қағу санын реттеу
- Жылдам өшіру (KickBack Control)
- Толық автоматты шпиндель бекіту (Auto-Lock)
- Жүріс тежегіші
- Артық жүктемеден жылу қорғанышы
- Пайдалану нұсқаулары
- Пайдалануға ендіру
- Техникалық күтім және қызмет
- PSB 18 LI-2 Ergonomic
- Instrucţiuni de siguranţă
- Descrierea produsului şi a performanțelor sale
- Montare
- Funcţionare
- Punere în funcţiune
- Introducerea acumulatorului
- Reglarea direcţiei de rotaţie (consultaţi imaginea B)
- Preselectarea cuplului de strângere
- Reglarea modului de funcţionare (consultă imaginea C)
- Selectare mecanică a treptelor de turaţie
- Pornire/Oprire
- Reglarea turaţiei/numărului de percuţii
- Frâna de siguranţă (KickBack Control)
- Dispozitivul de blocare complet automată a axului (Auto-Lock)
- Frână de întrerupere
- Protecţie la suprasarcină dependentă de temperatură
- Instrucţiuni de lucru
- Punere în funcţiune
- Întreţinere şi service
- PSB 18 LI-2 Ergonomic
- Указания за сигурност
- Описание на продукта и дейността
- Монтиране
- Работа с електроинструмента
- Пускане в експлоатация
- Поставяне на акумулаторната батерия
- Настройване на посоката на въртене (вж. фиг. B)
- Регулиране на въртящия момент
- Регулиране на режима на работа (вж. фиг. C)
- Механичен редуктор
- Включване и изключване
- Регулиране на скоростта на въртене/честотата на ударите
- Бързо изключване (KickBack Control)
- Автоматично блокиране на вала (Auto-Lock)
- Спирачка за ограничаване на въртенето по инерция
- Температурна защита срещу претоварване
- Указания за работа
- Пускане в експлоатация
- Поддържане и сервиз
- PSB 18 LI-2 Ergonomic
- Безбедносни напомени
- Опис на производот и перформансите
- Монтажа
- Употреба
- Ставање во употреба
- Вметнување на батеријата
- Подесување на правецот на вртење (види слика B)
- Избирање на вртежниот момент
- Подесување на режимот на работа (види слика C)
- Механички избор на брзини
- Вклучување/исклучување
- Подесување на бројот на вртежи/удари
- Брзо исклучување (KickBack Control)
- Целосна автоматска блокада на вретеното (Auto-Lock)
- Сопирачка за исфрлување од брзина
- Заштита од преоптоварување во зависност од температурата
- Совети при работењето
- Ставање во употреба
- Одржување и сервис
- PSB 18 LI-2 Ergonomic
- Bezbednosne napomene
- Opis proizvoda i primene
- Montaža
- Rad
- Puštanje u rad
- Postavljanje akumulatora
- Podešavanje smera obrtanja (pogledajte sliku B)
- Biranje obrtnog momenta
- Podešavanje režima rada (videti sliku C)
- Mehanički izbor brzine
- Uključivanje/isključivanje
- Podešavanje broja obrtaja/udara
- Funkcija brzog isključivanja (KickBack Control)
- Potpuno automatska blokada vretena (Auto‑Lock)
- Inerciona kočnica
- Zaštita od preopterećenja zavisna od temperature
- Uputstva za rad
- Puštanje u rad
- Održavanje i servis
- PSB 18 LI-2 Ergonomic
- Varnostna opozorila
- Opis izdelka in storitev
- Namestitev
- Delovanje
- Uporaba
- Namestitev akumulatorske baterije
- Nastavitev smeri vrtenja (glejte sliko B)
- Predizbira vrtilnega momenta
- Nastavitev načina delovanja (glejte sliko C)
- Mehanska izbira stopnje
- Vklop/izklop
- Nastavitev števila vrtljajev/števila udarcev
- Hitri izklop (KickBack Control)
- Samodejno aretiranje vretena (Auto-Lock)
- Zavora izteka
- Zaščita pred preobremenitvijo, ki deluje glede na temperaturo
- Navodila za delo
- Uporaba
- Vzdrževanje in servisiranje
- PSB 18 LI-2 Ergonomic
- Sigurnosne napomene
- Opis proizvoda i radova
- Montaža
- Rad
- Puštanje u rad
- Umetanje aku-baterije
- Namještanje smjera okretanja (vidjeti sliku B)
- Prethodno biranje zakretnog momenta
- Namještanje načina rada (vidjeti sliku C)
- Mehaničko biranje brzina
- Uključivanje/isključivanje
- Namještanje broja okretaja/broja udaraca
- Brzo isključivanje (KickBack Control)
- Automatska blokada vretena (Auto-Lock)
- Inercijska kočnica
- Zaštita od preopterećenja ovisna o temperaturi
- Upute za rad
- Puštanje u rad
- Održavanje i servisiranje
- PSB 18 LI-2 Ergonomic
- Ohutusnõuded
- Toote kirjeldus ja kasutusjuhend
- Paigaldus
- Kasutamine
- Seadme kasutuselevõtt
- Aku paigaldamine
- Pöörlemissuuna seadmine (vt jn B)
- Pöördemomendi valik
- Töörežiimi seadmine (vt jn C)
- Mehaaniline käiguvalik
- Sisse-/väljalülitamine
- Pöörlemiskiiruse/löögikiiruse seadmine
- Kiirväljalülitus (KickBack Control)
- Täisautomaatne spindlilukustus (Auto-Lock)
- Järelpöörlemispidur
- Temperatuurist sõltuv ülekoormuskaitse
- Töösuunised
- Seadme kasutuselevõtt
- Hooldus ja korrashoid
- PSB 18 LI-2 Ergonomic
- Drošības noteikumi
- Izstrādājuma un tā funkciju apraksts
- Montāža
- Lietošana
- Uzsākot lietošanu
- Akumulatora ievietošana
- Griešanās virziena izvēle (attēls B)
- Griezes momenta iestatīšana
- Darba režīma izvēle (attēls C)
- Mehāniskā pārnesumu pārslēgšana
- Ieslēgšana un izslēgšana
- Griešanās ātruma/triecienu biežuma regulēšana
- Ātrā izslēgšanās (KickBack Control)
- Pilnīgi automātiska darbvārpstas fiksēšana (Auto-Lock)
- Izskrējiena bremze
- Termoatkarīga aizsardzība pret pārslodzi
- Norādījumi darbam
- Uzsākot lietošanu
- Apkalpošana un apkope
- PSB 18 LI-2 Ergonomic
- Saugos nuorodos
- Gaminio ir savybių aprašas
- Montavimas
- Naudojimas
- Paruošimas naudoti
- Akumuliatoriaus įdėjimas
- Sukimosi krypties nustatymas (žr. B pav.)
- Sukimo momento pasirinkimas
- Veikimo režimo nustatymas (žr. C pav.)
- Mechaninis greičių perjungimas
- Įjungimas ir išjungimas
- Sūkių skaičiaus ir smūgių skaičiaus nustatymas
- Greitojo atjungimo įtaisas (KickBack Control)
- Visiškai automatinė suklio blokuotė („Auto‑Lock“)
- Inercinis stabdys
- Su temperatūros pokyčiu susijusi apsauga nuo perkrovos
- Darbo patarimai
- Paruošimas naudoti
- Priežiūra ir servisas
- PSB 18 LI-2 Ergonomic
- إرشادات الأمان
- وصف المنتج والأداء
- التركيب
- التشغيل
- بدء التشغيل
- تركيب المركم
- ضبط اتجاه الدوران (انظر الصورة B)
- ضبط عزم الدوران مسبقا
- ضبط نوع التشغيل (انظر الصورة C)
- اختيار ترس السرعة ميكانيكيا
- التشغيل والإطفاء
- ضبط عدد اللفات/عدد الطرقات
- خاصية الإطفاء السريع (وظيفة KickBack Control)
- (تلقائي قفل) تثبيت آلي كامل لمحور الدوران
- مكبح إنهاء الدوران
- وسيلة حماية من التحميل الزائد المرتبطة بدرجة الحرارة
- إرشادات العمل
- بدء التشغيل
- الصيانة والخدمة
English | 13
nected and properly used. Use of dust collection can re-
duce dust-related hazards.
u Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe in-
jury within a fraction of a second.
Power tool use and care
u Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was de-
signed.
u Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
u Disconnect the plug from the power source and/or re-
move the battery pack, if detachable, from the power
tool before making any adjustments, changing ac-
cessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
u Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
u Maintain power tools and accessories. Check for mis-
alignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
u Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
u Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into ac-
count the working conditions and the work to be per-
formed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
u Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Battery tool use and care
u Recharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of bat-
tery pack may create a risk of fire when used with another
battery pack.
u Use power tools only with specifically designated bat-
tery packs. Use of any other battery packs may create a
risk of injury and fire.
u When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
u Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help. Liquid ejected from the bat-
tery may cause irritation or burns.
u Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk
of injury.
u Do not expose a battery pack or tool to fire or excess-
ive temperature. Exposure to fire or temperature above
130°C may cause explosion.
u Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage
the battery and increase the risk of fire.
Service
u Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
u Never service damaged battery packs. Service of bat-
tery packs should only be performed by the manufacturer
or authorized service providers.
Safety information for drills and screwdrivers
Safety instructions for all operations
u Wear ear protectors when impact drilling. Exposure to
noise can cause hearing loss.
u Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting ac-
cessory or fasteners may contact hidden wiring. Cut-
ting accessory or fasteners contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
Safety instructions when using long drill bits
u Never operate at higher speed than the maximum
speed rating of the drill bit. At higher speeds, the bit is
likely to bend if allowed to rotate freely without contact-
ing the workpiece, resulting in personal injury.
u Always start drilling at low speed and with the bit tip
in contact with the workpiece. At higher speeds, the bit
is likely to bend if allowed to rotate freely without contact-
ing the workpiece, resulting in personal injury.
u Apply pressure only in direct line with the bit and do
not apply excessive pressure.Bits can bend causing
breakage or loss of control, resulting in personal injury.
Additional safety warnings
u Hold the power tool securely. When tightening and
loosening screws be prepared for temporarily high torque
reactions.
Bosch Power Tools 1 609 92A 6DE | (16.06.2021)