Installation Instructions
6
Elbow connection with 3/4” female hose threads on one end and fits
your water supply line (copper tubing, compression fitting, or braided
hose) on the other.
Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1 ground,
insulated copper conductors rated 75° C or higher.
Only needed if house electrical line is not adequate.
Hot Water Supply Line - Minimum 3/8″ O.D. copper tubing or metal
braided dishwasher supply line.
Only needed if house water supply line is not sucient.
Shut-o valve and fittings appropriate for hot water supply line
(copper tubing/compression fitting, or braided hose).
UL listed conduit connector or strain relief is required if you attach the
field wiring directly to the terminal block.
Tools and Materials Needed
Wire Cutter
Needle Nose Pliers
Pliers
Wire Stripper
ø1/16 in
(2 mm)
Adjustable Wrench
Tape Measure
Drill
Hole Saw
Flat Screwdriver
Level
Phillips Screwdriver