Installation Instructions
English 19
Install electrical wiring
CAUTION: Installation work and electrical wiring must
construction.
CAUTION:
electrician install a three slot receptacle.
within reach of the downdraft’s power cord.
U.L. approved strain relief.
Based on blower selected, go to the relevent
section:
A - Flex Blower Wiring
B - Remote Blower Wiring
A - Flex Blower Wiring
B - Remote Blower Wiring
3
3
NOTE: Some blowers may come with plugs or connectors,
these should be removed and the 14/4 ROMEX or Conduit
5. Connect power wires to wires in electrical panel wiring
Connect Downdraft to Power
1. Plug the downdraft’s power cord into the 3-pronged
receptacle. Make sure that the power cord is routed away
from the heat generated by the cooktop.
2. Check operation.
the intake housing and remove the front panel to access
INSTALLATION
WIRING BOX
COVER
FLEXIBLE
BLOWER
M
ELECTRICAL PANEL
WIRING
BOX
BROWN (HIGH 4)
WHITE (NEUTRAL)
RED (MED 2)
GROUND SCREW
ORANGE (MED-HIGH 3)
BLACK
WHITE
BLUE (cap off)
RED
ORANGE
GREEN
REMOTE
BLOWER
M
ELECTRICAL PANEL
WIRING
BOX
BROWN (HIGH 4)
WHITE (NEUTRAL)
RED (MED 2)
GROUND SCREW
ORANGE (MED-HIGH 3)
14/4 ROMEX
OR CONDUIT