Home Connect Installation Guide
EN5
Step 2.1: Connect your fridge-freezer to
your WLAN home network (Wi-Fi) with
WPS
Please enter step 2.1 only when prompted to by the app.
The following steps describe operations at the home
appliance itself.
1 | Press the menu button.
1
The connect button lights up.
The submenu display will show Cn.
2 | Press the
submenu button until the submenu display
shows AC and the settings display shows OF.
2
3
3 | Press the settings button.
The settings display will show an animation for 2 minutes.
4 | Activate the WPS function on your home network router
within the next 2 minutes
After a few seconds, On will start ashing in the settings
display.
The app will get notied once your fridge-freezer has been
successfully connected to your WLAN home network (Wi-Fi).
5 | Follow the instructions in the app.
Information:
If the connection could not be established within 2
minutes, make sure your fridge-freezer is within the
range of your WLAN home network (Wi-Fi).
For some appliances the WPS mode is also called
"automatic mode".
PRF_Fridge-Freezer_MD310_BO_RNA_8001106536.indd 5 07.11.2018 13:45:29