Home Connect Installation Guide

EN6
Step 2.2: Connect your refrigerator to
your WLAN home network (Wi-Fi) step-
by-step
Please enter step 2.2 only when prompted to by the app.
The following steps describe operations at the home
appliance itself.
1 | Press the menu button.
1
The connect button lights up.
The submenu display will show Cn.
2 | Press the
submenu button until the submenu display
shows SA and the settings display shows OF.
3
2
3 | Press the settings button.
The settingsdisplay will show an animation.
The home appliance will open a temporary Wi-Fi network,
"HomeConnect", with the password "HomeConnect" for a
few minutes.
Using this temporary Wi-Fi network, the app will
transmit the name (SSID) and the password of
your home network (Wi-Fi) to the home appliance,
thereby enabling it to connect to your home network
(Wi-Fi).
4 | Follow the instructions in the app.
Information:
For some appliances the step-by-step mode is also
called "SAP mode" or "manual mode".
If the step-by-step mode does not work please
check:
- Your appliance is in the range of the WLAN home
network (Wi-Fi).
- Your smartphone/tablet is connected to your
WLAN home network (Wi-Fi).
- Your smartphone/tablet and appliance are
connected to the same WLAN home network
(Wi-Fi).
PRF_Fridge-Freezer_MD310_BO_RNA_8001106536.indd 6 07.11.2018 13:45:29