User Manual

Cooktop-based hood control en-us
25
4. Select the settings value in the settings area.
a is blinking on the cooking zone display.
5. If the appliance is not yet connected to your home net-
work, press the WPS button on the router within the
next 2minutes.
a The cooktop is connected to your home network.
lights up on the cooking zone display.
6. Initiate the connection process on the hood within the
next 2minutes.
a When the connection is completed lights up on the
cooking zone display.
a The hood control icons light up on the control panel.
8.3 Resetting the connection
If you have problems connecting your appliance to your
home network (Wi-Fi) or if you want to log your appliance
onto a different home network (Wi-Fi) , you can reset the
HomeConnect™ settings.
Note:If you reset the HomeConnect™ settings, the con-
nection to any hood will also be terminated.
1. Turn on the cooktop.
2. Press and hold kitchen timer for 4seconds.
a The product information is displayed.
3. Press kitchen timer repeatedly until and are dis-
played alternately.
4. Set the settings value to in the settings area.
8.4 Controlling the hood via the cooktop
In the basic settings menu, you can configure what the
hood should do when the cooktop or individual cooking
zones are switched on or off.
You can select other settings using the control panel.
Setting the fan
1. Touch hood control.
2. Select the fan level.
You can choose between the levels 1, 2 and 3. To se-
lect the levels Boost and PowerBoost, press 4 or 5 in
the settings area, or press speed boost repeatedly until
the required intensive level is set.
Turning off the fan
1. Touch kitchen timer.
2. Select fan setting ⁠.
Setting automatic mode
▶
Touch hood control repeatedly until lights up.
a Depending on the configuration of the hood sensor, the
fan will start automatically when steam is produced. Re-
fer to the operating instructions of your hood.
Deactivating automatic mode
▶
Touch hood control repeatedly until goes out or Se-
lect a different fan setting.
Setting the hood lighting
You can switch the hood light on and off via the control
panel of the cooktop.
▶
Press hood light.
Note:Depending on the basic settings you have selected,
the light will automatically be switched on or off when the
cooktop is switched on or off.
8.5 Overview of the hood control settings
You can adjust the cooktop based hood controls to suit your requirements at any time.
Note:The settings will only be displayed if the appliance is connected to a hood. Some of these settings may not be avail-
able.
Setting Values Description
¡ - Not connected
1
/disconnect
¡ - Start connection process
¡ - Connected to home network
(Wi-Fi)
¡ - Connected to hood
Connection between cooktop and hood
¡ - Deactivated
The hood must be switched on
manually, if required.
¡ - Switched on in automatic
mode.
1
In automatic mode, the hood
switches itself on when one of
the cooking zones is switched
on.
¡ - Switched on in manual
mode.
The hood switches itself on at
the default level when one of the
cooking zones is switched on.
Automatic fan switch-on
The display shows this setting only when the appliance has been con-
nected to the hood.
1
Factory setting (may vary according to model)