User Manual

en
|
10
|
User guide
| HDS 200/HDS 250
HD Scan Tool for Class 4-8 Diesel, Light and Medium Vehicles
581618 | REV. B | 11.2018
Bosch Automotive Service Solutions Inc.
4 Using the Scan Tool
4.1 The Scan Tool
2
4
5
3
7
7
2
3
6
8
1
1. USB port - provides USB connection for the com-
puter.
2. F1 and F2 keys are used to perform the
specified action on the display directly above the
key. If nothing appears on the display directly above
the F1 and F2 keys, then the keys are inactive.
3. LEFT and RIGHT arrow keys - selects YES or
NO and selects data parameters for custom data list.
4. ENTER key - selects displayed items.
5. ON/OFF key - turns power ON or OFF.
6. BACK key - goes to the previous screen or
level.
7. UP and DOWN arrow keys - moves selection up
or down.
8. LCD display (color, backlit, QVGA resolution)
9. DLC cable (not shown) - provides connection for
vehicle interface.
10. Serial Number Plate (not shown) - Located inside
battery compartment, provides serial number of
scan tool.
11. Battery Compartment (on back; not shown) - pro-
vides power to the scan tool when reprogramming
from a personal computer or off-vehicle reviewing of
codes and printing.
12. 12V Power Jack (not shown) - provides power to
scan tool when scan tool is conneced to certain
Heavy Duty vehicles.
4.2 Specifications
Display Color, backlit, QVGA resolution
Operating Temperature
0 to 50°C (32 to 122°F)
Storage Temperature -20 to 70°C (-4 to 158°F)
Internal Power
4-AAA Batteries
Barrel Jack
External Power
7 to 16 Volts
DLC Adapter Cable
External Power
HDS 200: 7 to 16 Volts
HDS 250: 7 to 36 Volts
A minimum of 8.0 V is required for most control modules
to operate properly in a vehicle.
Dimensions
Height Width Depth
7 inches 3.75 inches 1.125 inches
178 mm 95 mm 29 mm
Accessories
Part Description Part No.
Extender
Cable
Cable used to connect
vehicle specific adapter
cables to scan tool
7-0137
OBD II
Cable
Communicates
between vehicle and
tool
1699200243
(HDS 200)
1699200246
(HDS 250)
Cigarette
Lighter
Cable
Cable used to power
scan tool from cigarette
lighter.
7-0135
9-pin
Deutsch
Cable
Refer to page 8
1699200242
(HDS 200)
1699200245
(HDS 250)
6-Pin
Deutsch
Cable
Refer to page 8
1699200241
(HDS 200)
1699501129
*formerly 1699200244
(HDS 250)
USB Cable
Cable used to update
scan tool firmware and
print data to Scanning
Suite
0038-000-3430
* Some units were originally shipped with a 6-Pin Deutsch Cable (Part No.
1699200244). When replacing this cable, the 6-Pin Deutsch Cable (Part No.
1699501129) should be purchased.
Optional Accessories
Part Description Part No.
Battery Clip
Y Adapter
Cable
Adapter that allows the
Cigarette Lighter Cable to
connect directly to vehicle
battery cables
7-0136
Replacement parts are available from the manufacturer
by contacting customer service at 1-855-267-2483 (8:00-
6:00 EST Monday-Friday).