User Manual

en
|
12
|
User guide
| HDS 200/HDS 250
HD Scan Tool for Class 4-8 Diesel, Light and Medium Vehicles
581618 | REV. B | 11.2018
Bosch Automotive Service Solutions Inc.
From System Setup menu:
1. Select English/Metric.
• Use the UP and DOWN keys until English/
Metric is highlighted.
• Press .
System Setup
English/Metric
Auto-Power Off
Quick Test
Print Header
Language Setup
Long PID/SPN Names
Pre-Trigger Setup
Tool Information
Display Test
2. Select desired measurement unit.
• Use the UP and DOWN keys until the
desired unit is highlighted.
• Press .
Measurement Units
English
Metric
3. Save measurement setting.
• Press .
Changing Auto-Power Off
The Auto-Power Off feature allows the tool to turn off
automatically after a selected amount of time when tool
is not being used. The Auto-Power Off feature will only
turn the tool off when it is operating on battery power.
From System Setup menu:
1. Select Auto-Power Off.
• Use the UP and DOWN keys until Auto-
Power Off is highlighted.
• Press .
System Setup
English/Metric
Auto-Power Off
Quick Test
Print Header
Language Setup
Long PID/SPN Names
Pre-Trigger Setup
Tool Information
Display Test
2. Increase or Decrease Auto-Power Off time.
• Use the UP key to increase time.
• Use the DOWN key to decrease time.
• Press .
Auto-Power Off
Press ENTER to continue
Increase time
2 minute(s)
Decrease time
3. Save Auto-Power Off time.
• Press .
Quick Test
Quick Test is a feature of the tool that occurs the first
time the tool establishes communication with the vehi-
cle after vehicle selection. Quick Test will display the
results of I/M Monitors (Global Automotive OBDII and
HD OBDII only) and Read Codes.
From System Setup menu:
1. Select Quick Test.
• Use the UP and DOWN keys until Quick
Test is highlighted.
• Press .
System Setup
English/Metric
Auto-Power Off
Quick Test
Print Header
Language Setup
Long PID/SPN Names
Pre-Trigger Setup
Tool Information
Display Test
2. Select desired Quick Test choice.
• Use the UP and DOWN keys until desired
choice is highlighted.